Hearth and Home Technologies II-B Positioning the Logs, Inch, Log Set Assembly LOGS-TWI

E. Positioning the Logs

Log Set Assembly: LOGS-TWI

3	4	1
2	5	6
	7

CAUTION: Logs are fragile! Carefully remove the logs from the packaging. Remove the metal supports which held the log box in place during shipping.

STEP 1. Before positioning the logs, refer to the instal- lation manual for electric ember setup and ember place- ment.

Indents

1

1-inch

STEP 2. LOG #1 (SRV2005-701): Use the indents on the bottom side of the log to position the large end of the log onto the grate tine as shown. Position the thin end of log #1 one inch from port pattern as shown.

Grate Bar Cutout

Pilot

Assembly

Cutout

1

2

STEP 3. LOG #2 (SRV2005-700): Position log #2 on the left grate bar and the pilot assembly. Use the cut out notches on the log to position it as shown.

Heat & Glo LifeStyle Collection • Twilight-II-B • 2108-900 Rev. G • 8/07 25