Sterling Plumbing 882.00253.00 specifications Station Alarms, Pump Alarms, System Alarms

Page 41

7-2 Alarms

The format for all station alarms is “Station n [alarm text],” for example, “Station 12 receiver low level.” The format for all pump alarms is “Pump n [alarm text].” Any alarm that does not start with “Station” or “Pump” is a system alarm.

The following tables list all alarms alphabetically, together with possible causes. A “critical” alarm is one that causes the affected device to stop.

Note: You can also see a list of alarms and their causes in the controller’s online help. To display this information, touch the color key of statuses in the upper right-hand corner of either the “Station Status” or the “Pump Status” screen, or touch Help at any other screen. When you are finished reviewing the help, touch Return.

Station Alarms

Alarm message

Possible cause

 

Material line is blocked.

 

Vacuum line is blocked.

High vacuum

Convey time is too long (time-fill station only).

Sequence valve has malfunctioned.

 

Vacuum switch has malfunctioned.

 

Note: After you have corrected the cause of this alarm, the alarm will be

 

cleared when the controller has conveyed a full load to this station.

 

Material container is empty.

 

Material line is disconnected from material source.

No convey

Vacuum line is disconnected from station.

Take-off compartment is not adjusted properly.

 

Convey time is too short.

 

Note: As a stopgap measure, you can disable the “no convey” alarm for

 

this station until the problem can be remedied. See pp. 37.

Not assigned (Critical)

Station has not been assigned to a pump

Pump Alarms

Alarm message

Possible cause

Pump failure

Circuit breaker or overload protector has tripped.

(Critical)

Contactor has malfunctioned.

Pump fault

(Function determined by your facility.)

Too many stations assigned to

More than 20 stations are assigned to this pump.

pump

(Critical)

 

System Alarms

Alarm message

Possible cause

Low battery

Battery for the controller is defective.

Battery for the controller is old and drained.

 

4 –Pump 38-Station Controllers

Chapter 7: Troubleshooting

40 of 44

Page 40 Page 42
Image 41
Page 40 Page 42
Contents SCC 4-Pump 38-Station Controllers Parts and Service Department Shipping Information Table of Contents Maintenance Configurable Settings Safety Symbols Used in this Manual SafetyHow to Use This Manual Wear Safety Glasses and Work Gloves General Responsibility ResponsibilityOperator Responsibility Maintenance ResponsibilityReporting a Safety Defect General Description Functional DescriptionModels Covered in This Manual Mechanical Features Standard FeaturesElectrical Features Controller FeaturesSafety Devices and Interlocks Optional FeaturesSafety Circuit Standards Fail Safe OperationSafety Device Lock-Outs Making Control Panel Power Drop Wiring Connections InstallationUncrating Mounting the Control PanelConnecting the Control Panel to the Pump Package SetupConnecting the Control Panel to Vacuum Hoppers Default Station Status Screen Before Setup Setting the Number of Stations and the Number of PumpsSystem Setup Screen Setting Up Alarm SilencesSetting Up Stations Setting Up Pump StagingStation Operator Screen Before Setup Pump Status Screen Setting Up PumpsSetup Password Finishing Setup Setting Up PasswordsOperator Password Initial Startup Overview OperationBasic Tasks Reviewing Station StatusColor Label Description Pump Status Screen During Operation Reviewing Pump StatusLogging On and Logging Off Password Entry ScreenStarting and Stopping the System Enabling and Disabling Stations and PumpsStation Operator Screen Reviewing and Adjusting Basic Station SettingsAdjusting Convey Time and Dump Delay Navigating among the Station Operator Screens Activating and Stopping Priority Convey for a StationReviewing and Resetting a Pump Hour Meter Adjusting Advanced SettingsTransfer To Standby Pump Screen Transferring Stations to a Standby PumpTransfer To Standby Pump Button Silencing Alarms AlarmsReviewing Alarms Maintenance Options for Station Setup Configurable SettingsAlarm Name Description Options Default Special conveyNo convey # attempts beforeIdle Time Options Options for Pump SetupProblem Possible Cause Solution TroubleshootingGeneral Troubleshooting Pump Alarms Station AlarmsSystem Alarms Alarm message Possible causeOptional Components WarrantyAppendix Quantity Part Number Description Drawings and DiagramsSpare Parts List Warranty Returns Safety Tag InformationController Safety Tags Returned Material PolicyTechnical Assistance Contact Information Controller Identification Serial Number Tag

882.00253.00 specifications

Sterling Plumbing has established a solid reputation in the plumbing industry, and their model 882.00253.00 is an exemplary product that showcases quality and innovation. This particular item is part of Sterling's commitment to providing reliable and stylish plumbing fixtures that meet the needs of modern homes.

One of the standout features of the Sterling Plumbing 882.00253.00 is its exceptional design. The product is crafted with sleek lines and a contemporary aesthetic, making it an ideal choice for various bathroom styles, from minimalistic to more traditional setups. The finish is not only visually appealing but also practical, as it resists tarnishing and corrosion, ensuring durability and longevity.

In addition to its attractive design, the 882.00253.00 includes advanced technologies that enhance its functionality. The model employs a user-friendly installation system, allowing for a smooth and hassle-free setup. Homeowners or contractors can easily install this fixture without the need for specialized tools, reducing labor costs and installation time.

Another key characteristic of this plumbing fixture is its water efficiency. The Sterling 882.00253.00 is engineered with advanced flow technologies that help conserve water without compromising performance. This eco-friendly feature is becoming increasingly important as more consumers look for ways to reduce their environmental footprint and lower utility bills.

The Sterling Plumbing model also boasts robust construction. Made from high-quality materials, it is designed to withstand everyday wear and tear in busy households. The sturdy components ensure a dependable performance throughout its lifespan, making it a wise investment for homeowners and builders alike.

Furthermore, the 882.00253.00 emphasizes user comfort and accessibility. The ergonomic design and intuitive controls make it easy to use for individuals of all ages, enhancing overall user satisfaction. Whether it’s for bathroom usage or other plumbing needs, this model does not fall short in delivering top-tier performance.

Overall, the Sterling Plumbing 882.00253.00 stands out as a remarkable fixture that blends aesthetic appeal with cutting-edge technologies and user-focused design. Its durability, efficiency, and modern styling make it a favorable option for consumers looking to upgrade their plumbing solutions. Investing in this model means choosing a reliable product that aligns with both functionality and contemporary design principles.
Top Page Image Contents