Maintenance, Battery, Calibration | 3M RSS-214 instruction

MAINTENANCE

WARNING

Never alter or modify this instrument. Substitution of components may impair intrinsic safety. Doing so may adversely affect product performance and result in sickness or death.

Repair or replace parts only with the 3M components approved for this unit. Failure to do so may adversely affect product performance and result in sickness or death.

Wet Bulb

Operation of the Wet Bulb with a fouled wick (e.g. discolored, stiff or will not wet) may lead to errant (high) readings.

Wick Replacement

To replace a fouled wick, pull it and its sponge straight upward over the sensor. Slide a new proper fitting 3M wick over the sensor such that it is snug over the tip and reaches the bottom of the reservoir. To prevent water spillage, a snug fitting 3M sponge should be placed over the wick encased sensor and positioned in the mouth of the reservoir. Dampening the sponge and wick facilitates removal and replacement.

Water Treatment

For maximum accuracy and extended wick life, distilled water should be used (available from most pharmacies). Alternately, demineralized tap water may be used. Be sure to follow instructions supplied with the demineralizer carefully.

Cleaning

CAUTION

Avoid the use of harsh cleaning materials, abrasives and other organic solvents. Such materials may permanently scratch the surfaces and damage the display window, labels, or monitor housing.

To clean external surfaces, use a soft wipe/tissue dampened with a mild detergent in warm water solution.

Storage

Remove each sensor by pulling straight up (DO NOT TWIST) on its connector collar. Empty the Wet Bulb reservoir and squeeze excess water from its sponge. Return all items to their proper location in the carrying case.

BATTERY

WARNING

Battery must be replaced in a non-hazardous area only. Battery replacement is not an intrinsically safe operation. Use only approved battery. Failure to do so may result in sickness or death.

Only charge the instrument in non-hazardous areas using a 3M battery charger (AC adapter). Battery charging and operating with AC adapter is not an intrinsically safe operation. Do not attempt to charge alkaline batteries. Doing so may adversely affect product performance and result in sickness or death.

CAUTION

Observe proper polarity when inserting the battery. Polarity is marked on the inside of the battery compartment.

This instrument may contain a nickel metal hydride (NiMH) battery. Dispose of battery in accordance with local regulations.

The WIBGET monitor is powered by a rechargeable 9v (8.4v) Ni-MH battery and comes with an external charger. In addition the WIBGET monitor can operate on a non- rechargeable 9v alkaline battery or the charger (AC adapter).

Charging

When the battery nears full discharge, “LOBAT” appears in the upper right-hand corner of the display. For continued/continuous operation or to simply recharge the battery, connect the charger via its receptacle (12vdc) located on the lower left side of the monitor. Recharging requires a minimum of 12 hours. Although Ni-MH batteries may be recharged many times, they eventually degrade, requiring replacement.

Replacement

With the power ‘OFF’, remove all four screws from the rear case and open the instrument. Noting the battery’s location, replace it. Reinstall the rear case using the reverse process.

CALIBRATION

The WIBGET monitor base unit and all three sensors can be returned to 3M for calibration to NIST standards. A CERTIFICATE OF INSTRUMENT CALIBRATION will be issued only if the WIBGET base unit along with all three of its sensors have passed calibration. Traceable certification and before/after data can also be provided at an additional cost. It is recommended that the WIBGET monitor be calibrated yearly.

RSS-214 specifications

3M RSS-214 is a cutting-edge communication solution designed to improve emergency response and management in critical situations. As a part of the robust suite of public safety and emergency management products by 3M, the RSS-214 is engineered to meet the diverse needs of first responders, allowing for efficient and effective communication during emergencies.

One of the main features of the 3M RSS-214 is its advanced voice communication capabilities. This system supports high-definition audio, ensuring that every message is clear and intelligible, which is crucial in high-stress scenarios where miscommunication can lead to dire consequences. The device incorporates noise-cancellation technology that minimizes background sounds, allowing operators to focus solely on the critical messages being communicated.

Another significant technological feature of the RSS-214 is its integration with various other emergency management systems. This interoperability allows for seamless communication among different agencies, which is often a challenge in emergency response situations. By utilizing common protocols and standards, the RSS-214 ensures that first responders from various organizations can share information quickly and effectively.

The RSS-214 is also equipped with real-time data exchange capabilities, which means responders can access vital information, such as maps, deployment statuses, and resource inventories, simultaneously while communicating with each other. This access to real-time data not only enhances situational awareness but also enables informed decision-making under pressure.

Durability is a key characteristic of the 3M RSS-214, designed to withstand the rigors of harsh environments typically encountered during emergencies. The materials used in the construction of the device are resistant to impact and water, ensuring reliability when it matters most.

Furthermore, the user-friendly interface of the RSS-214 allows for quick navigation and operation, so first responders can focus on their primary tasks rather than getting bogged down with complex technology. The device is also lightweight and portable, making it easy to carry and deploy in various scenarios.

In summary, the 3M RSS-214 is a powerful communication tool that enhances the effectiveness of emergency response efforts. With its high-definition audio, integration capabilities, real-time data exchange, durability, and user-friendly design, the RSS-214 is an essential asset for first responders aiming to improve outcomes in critical situations.