Carrier 30XA080-500 specifications 4404, 090, 100, 110, 120

6	a30
	-4404

1.50 DIA. [38.1]

RIGGING HOLE

[80]
[863]	A
	[1475]
	[1729]
	[2236]
	[508]
	[913]
[140]
B	[1270]
[2769]	[3070]
	[4780]

TOP VIEW

0.875 DIA.[22.2]

MOUNTING HOLE

MOUNTING

PLATE

7.88

[200]

1.75

[44]

DETAIL "A"

MOUNTING PLATE

CONTACT SURFACE

TYPICAL 4 PLACES

1.31 [33]

5.0

[127]

3.93

[100]

30XA UNIT	A	B
090	44.11 [1120]	86.93 [2208]
100	44.11 [1120]	87.22 [2215]
110	44.11 [1120]	87.62 [2226]
120	44.11 [1120]	87.12 [2213]

NOTES:

1.Unit must have clearances as follows: Top — Do not restrict

Sides and Ends — 6 ft (1.8 m) from solid surface.

2.Temperature relief devices are located on liquid line and economizer assem- blies and have 1/4-in. flare connection.

3.3/8-in. NPT vents and drains located in each cooler head at each end of cooler.

4.Drawing depicts unit with single-point power and standard two-pass cooler. Refer to the Packaged Chiller Builder program for other configurations.

5.Dimensions are shown in inches. Dimensions in [ ] are in millimeters.

6.Allow 8 ft (2.4 m) on either side of unit for condenser coil removal.

Fig. 3 — 30XA090-120 Air-Cooled Liquid Chiller without Pump Dimensions