3.Handle adapter
4.Hose
5.On/o switch
6.Handle
7.Variable power control
8.Cord rewind
9.Floor head
10.Crevice tool
11.Flip down brush
12.Upholstery tool
Assembly
Connecting the hose (fig. A)
•Insert the hose connector (13) into the inlet (14) of the appliance.
•Press firmly until it clicks into place.
Disconnecting the hose (fig. A)
•Press and hold the hose release buttons
(15).
•Pull the hose connector (13) out of the inlet (14) of the appliance.
Fitting the telescopic extension tube (fig. B)
•Firmly push handle adaptor (3) in to the telescopic extension tube (2).
Adjusting the telescopic extension tube (fig. C)
•Press down and hold the adjustment button (16) on the telescopic extention tube (2).
•Raise or lower the telescopic extention tube to the required height.
ENGLISH
Fitting accessories (fig. D)
The crevice tool (10) with flip down detail brush (11) allows for vacuuming in narrow and
The upholstery tool (12) allows for vacuuming on furniture, blinds, curtains, windows and stairs.
The floor head (9) is used for dry vacuuming.
The accessories can be fit on both the handle adaptor (3) and the telescopic extension tube (2).
•Firmly push the accessory onto the handle adaptor (3) or telescopic extension tube (2) as required.
•To remove an accessory, pull the accessory from the handle adaptor or the extension tube.
Note: When not in use the the floor head
(9)can be stored on the floor head mount (17, fig E).
Use
Switching on and o (fig. E)
•To switch the appliance on, press the on/o switch (5).
•To switch the appliance off, press the on/o switch (5).
Variable power control (fig. E)
The variable power control allows you to select the required suction force for job to be performed.
•Move the variable power control (7) left and right to the requried setting.
Select minimum suction power for delicate materials.
7