•Remove the dust bowl filter (24) from the end cap (23).
•Remove the filter cover (25) from the dust bowl filter (24).
•Brush all parts with with a soft brush or wipe with a damp cloth.
Warning! Ensure all parts are completely dry before reassembly.
•Refit the filter cover (25) onto the dust bowl filter (24).
•Refit the dust bowl filter (24) onto the end cap (23) by turning it clockwise.
•Place the dust bowl end cap (23) onto the dust bowl and twist it clockwise to lock into place.
•Refit the dust bowl to the appliance.
Cleaning the exhaust filter (fig. L)
•Press the exhaust filter cover release tab (26) to the right then pull the exhaust filter cover (27) off.
•Remove the Exhaust filter (28).
•Brush all parts with with a soft brush.
Warning! Ensure all parts are completely dry before reassembly.
•Refit the exhaust filter (28) then the exhaust filter cover (27).
Mains plug replacement
If a new mains plug needs to be fitted:
•Safely dispose of the old plug
•Connect the brown lead to the live terminal of the new plug
•Connect the blue lead to the neutral terminal
ENGLISH
•If the product is class I (earthed), connect the green/yellow lead to the earth terminal
Warning! If your product is class II double insulated (only 2 wires in the cord set), no connection is to be made to the earth terminal
•Follow the fitting instructions supplied with good quality plugs
•Any replacement fuse must be of the same rating as the original fuse supplied with the product
Technical data
|
| VO1850 (Type 1) |
Voltage | Vac | 220 - 240, |
Power | W | 1600W IEC |
|
| 1800W MAX |
Weight | kg | 1.5 |
|
|
|
9