ENGLISH
Select medium suction power for mattresses, upholstered furniture and carpets.
Select maximum suction power for tiled, wood and other hard floors.
Vacuuming
•When operating the appliance, make sure that the hose is not trapped, twisted or blocked.
Note: When Vacuuming you should ensure that the filter is fitted.
Note: When Vacuuming on hard surfaces you can extend the brushes on the floor head by pressing down the brush release button (18, fig D).
Optimising the suction force
In order to keep the suction force optimised, the filters must be cleared regularly during use.
Emptying the dust bowl (fig. F & G)
•Press the dust bowl release lever (19).
•Lift the dust bowl (1) from the appliance.
•Hold the dust bowl over a bin.
•Press the dust cap release lever (20) and empty the dust bowl.
•Press the dust cap (21) back on until it clicks into place.
•Refit the dust bowl by placing the front end into the appliance then pressing firmly on the back end until it clicks into place.
Cord rewind (fig. H)
•Press and hold the cord rewind button
(8).
Storing the appliance
Warning! When storing the appliance, switch the appliance off and unplug it.
•Store the appliance in a dry location. The appliance can be carried by the handle
(6).
Maintenance
Your Black & Decker corded appliance has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance on corded appliances:
•Switch off and unplug the appliance.
•Regularly clean the ventilation slots in your appliance using a soft brush or dry cloth.
•Regularly clean the motor housing using a damp cloth. Do not use any abrasive or
Cleaning the filters (fig. I, J, K & L)
The Dust bowl may be cleaned with water by running it under a tap. All other components should be cleaned with a soft dry brush or damp cloth.
Cleaning the dust bowl filter (fig. I, J & K)
•Remove and empty the dust bowl.
•Twist the dust bowl end cap (23) anti clockwise.
•Lift off the dust bowl end cap.
•Twist the dust bowl filter (24) anti clockwise.
8