Bosch Appliances 1594 manual Straight Guide Fence, Rabbeting Depth Stop, Drive Belt

Page 13

STRAIGHT GUIDE FENCE

The optional Straight Guide Fence can be used to cut various desired widths. (Fig. 14)

Installing the guide fence: Place the wing knob through the appropriate hole in the guide bracket and screw into the housing. Securely tighten wing knob.

Setting the cutting width: Loosen wing knob and slide the fence along the guide bracket to the desired position. Securely tighten wing knob. Be certain that the flat washer (supplied) is fitted between the bottom of the guide fence and wing knob or the guide fence is likely to slip.

RABBETING DEPTH STOP

The optional rabbeting depth stop accessory (Fig. 1) allows the user to set any rabbeting depth from 0 to 5/16 inch. For best results, it is important that the blade be properly aligned (See "BLADE ALIGNMENT"). The width of the rabbet is controlled by the width fence. The final depth is achieved by repetitive cutting until the rabbeting depth guide contacts the workpiece. The maximum rabbeting depth is 5/16"

Setting the rabbet depth: Loosen wing knob and using the depth scale on the rabbeting depth stop, set the desired rabbet depth. Securely tighten wing knob.

DRIVE BELT

The drive belt is a normal maintenance part and should be inspected periodically for wear. If the drive belt shows signs of drying out, cracking or tearing, it should be replaced. If the drive belt will not track properly or comes off the pulleys, it should be replaced.

Installing new drive belt: Loosen screw and remove the drive belt cover. Cut and remove the worn drive belt. Before installing the new drive belt, clean both pulleys thoroughly. First place the new drive belt onto the drive pulley then rotate clockwise while pushing the belt onto the driven pulley. Reinstall the drive belt cover and securely tighten screw (Fig. 15).

FIG. 14

9 mm

max

 

82

mm

 

 

 

max

 

 

OPTIONAL STRAIGHT

 

 

GUIDE FENCE

FIG. 15

 

DRIVEN

 

 

PULLEY

SCREW

 

DRIVE

 

PULLEY

DRIVE

DRIVE

BELT

BELT

 

COVER

-13-

Image 13
Contents Importante Power Tool Safety Rules Safety Rules for Planers Page Symbols Planer Functional Description and SpecificationsChip Extraction AssemblyPlaner Blades Removing Mini Tungsten Carbide BladesInstallation Procedure Installing and Adjusting Mini Carbide BladesConversion to HIGH-SPEED Steel Blades Installation of HSS Blades RetainersRemoval of Mini TC Blade Holders and Retainers Removing Large HSS BladesLeveling of HSS Blades Resharpening HSS BladesPlaning Action Operating InstructionsDepth of CUT & Feed Rate Unclogging the Chip Exhaust System Park Rest StandDeluxe Bevel Guide Fence Rabbeting Depth Stop Straight Guide FenceDrive Belt Accessories MaintenanceTool Lubrication Carbon BrushesAire de travail Règles de Sécurité GénéralesSécurité électrique Sécurité des personnesRéparation Consignes de sécurité pour les rabotsLa réparation des outils électriques doit être confiée Le plomb provenant des peintures à base de plomb Symboles Rabot Description fonctionnelle et spécificationsCapacités maximales Évacuation DES Copeaux AssemblageFers DE Rabot Démontage DES Mini Fers AU Carbure DE TungstèneMéthode D’INSTALLATION Installation ET Réglage DES MINI-FERS AU CarbureDE Leurs CONTRE-FERS Conversion Pour L’UTILISATION DE Fers EN Acier RapideMéthode Démontage DES Grandes Lames EN Acier RapideAlignement DES Fers EN Acier Rapide Raffûtage DES Fers EN Acier RapideRabotage Instructions d’utilisationDébouchage DU Système D’ÉVACUATION DES Copeaux ReposoirGuide Inclinable DE Luxe Butée DE Profondeur Pour Feuillures Guide DE Largeur ParallèleCourroie DE Transmission Service AccessoiresEntretien NettoyageArea de trabajo Normas de seguridad para herramientas mecánicasSeguridad eléctrica Seguridad personalServicio Normas de seguridad para cepillos mecánicosPage De Ni-Cd SímbolosCepillo mecánico Descripción funcional y especificacionesExtracción DE Virutas EnsamblajeCuchillas DE Cepillo Mecánico DE TungstenoProcedimiento DE Instalación Instalación Y Ajuste DE LAS Minicuchillas DE CarburoDE Alta Velocidad LCONVERSIÓN a Cuchillas DE AceroInstalación DE LAS Cuchillas DE AAV Y LOS Retenedores ProcedimientoNivelación DE LAS Cuchillas DE AAV Reafilado DE LAS Cuchillas DE AAVInterruptor Gatillo DE Encendido Y Apagado Instrucciones de funcionamientoAcción DE Acepillado Profundidad DE Corte Y Velocidad DE AvanceDesatascado DEL Sistema DE Salida DE Virutas Base DE Apoyo DE EstacionamientoTOPE-GUÍA Angular DE Lujo Tope DE Profundidad DE Rebajado TOPE-GUÍA DE Anchura ParaleloCorrea DE Transmisión Accesorios MantenimientoLimpieza Page Page Page Limited Warranty of Bosch Portable and Benchtop Power Tools

1594 specifications

Bosch Appliances has long been synonymous with quality, innovation, and reliability in the home appliance sector, and the Bosch Appliances 1594 model continues this tradition. Designed for those who seek optimal performance and cutting-edge technology, the 1594 offers a range of features that cater to modern kitchen needs.

One of the standout characteristics of the Bosch Appliances 1594 is its impressive energy efficiency. This model utilizes advanced engineering and energy-saving technologies that comply with strict energy standards, making it an eco-friendly choice for environmentally conscious consumers. Its efficient operation not only reduces energy consumption but also helps lower utility bills.

Another notable feature of the Bosch Appliances 1594 is its quiet operation. The appliance is equipped with a powerful yet remarkably silent motor, allowing users to enjoy a peaceful kitchen environment. This is particularly beneficial during late-night cooking sessions or family gatherings where conversation is key.

In terms of design, the Bosch Appliances 1594 boasts a sleek and modern aesthetic that fits seamlessly into any contemporary kitchen. The stainless steel finish not only enhances the appliance's appearance but also provides durability and easy maintenance. The well-thought-out interior layout maximizes space while allowing for easy access to all items stored within.

Technologically, the Bosch Appliances 1594 incorporates smart features that streamline everyday tasks. It often comes with a user-friendly interface, including touch controls and intuitive settings that simplify the cooking process. Many users appreciate features like multi-cooking options, allowing them to prepare various dishes simultaneously without sacrificing flavor or quality.

The Bosch 1594 model is also equipped with advanced cooking technologies, such as convection cooking, which promotes even heat distribution for perfectly cooked meals. This feature is especially beneficial for baking and roasting, ensuring consistent results every time.

Safety is another priority with the Bosch Appliances 1594. It comes with several safety features, including child locks and automatic shut-off options, giving users peace of mind while cooking.

Overall, the Bosch Appliances 1594 embodies the brand's commitment to combining functionality with stylish design. Its remarkable energy efficiency, quiet operation, smart technology, and safety features make it a standout choice for anyone looking to upgrade their culinary experience. Whether you are an amateur cook or a seasoned chef, the Bosch Appliances 1594 is engineered to meet and exceed your kitchen needs, making it a worthwhile investment for any home.