Bosch Appliances 1594 manual Installing and Adjusting Mini Carbide Blades, Installation Procedure

Page 8

4. Rotate the blade drum 180° and repeat

FIG. 4

the procedure to remove the second

 

blade.

 

INSTALLING AND ADJUSTING MINI

 

CARBIDE BLADES

 

If the blades and/or holder are gummed and

 

difficult to remove, remove the clamping

 

jaws and screws and clean all surfaces with

 

mineral spirits; lacquer thinner or alcohol, as

 

this will ensure an accurate blade setting

 

and proper tool performance. (See

FRONT

REMOVAL OF MINI TC BLADE HOLDERS

SHOE

AND RETAINERS)

 

To install, carefully slide the blades onto ridges on the blade holders.

To ensure proper operation and an even cut, the blades must be positioned so that they are:

• Centered relative to the front and rear shoes.

• Aligned with each other.

• Positioned so that they will not touch against any part of the planer when rotated.

•Evenly pressed back toward the holder to ensure that they are level.

INSTALLATION PROCEDURE

1.Align the groove on top of the blade with the ridge of the blade holder and carefully slide the blade onto the blade holder, as shown in Figure 6.

2. Using a block of wood push the TC blade back towards the blade holder so that the inner side of the blade is pressed against the sloping part of the blade holder. (This will ensure that the blades are level.)

3.Then tighten the Torx clamping screws using the correct tightening sequence

(1,2,3), as shown in Figure 4, and your planer is ready for use.

Blade Retainer Screws - Under normal circumstances, the position of the retainer on the mini TC blade holders does not require readjustment. If fact, the screws that attach the retainer to the blade holder are factory sealed with a yellow fastening compound that should not be disturbed. However, if you believe that adjustments must be made, proper adjustment is critical, and it is best performed by a Bosch Factory Service or Bosch Authorized Service Center.

BLADE WRENCH

CLAMPING

JAW CLAMPING SCREW

BLADE

DRUM

BLADE

HOLDER

RIDGE

FIG. 5

FIG. 6

BLADE

HOLDER

-8-

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Importante Power Tool Safety Rules Safety Rules for Planers Page Symbols Functional Description and Specifications PlanerAssembly Chip ExtractionPlaner Blades Removing Mini Tungsten Carbide BladesInstalling and Adjusting Mini Carbide Blades Installation ProcedureInstallation of HSS Blades Retainers Conversion to HIGH-SPEED Steel BladesRemoval of Mini TC Blade Holders and Retainers Removing Large HSS BladesResharpening HSS Blades Leveling of HSS BladesDepth of CUT & Feed Rate Operating InstructionsPlaning Action Deluxe Bevel Guide Fence Park Rest StandUnclogging the Chip Exhaust System Drive Belt Straight Guide FenceRabbeting Depth Stop Maintenance AccessoriesTool Lubrication Carbon BrushesRègles de Sécurité Générales Aire de travailSécurité électrique Sécurité des personnesLa réparation des outils électriques doit être confiée Consignes de sécurité pour les rabotsRéparation Le plomb provenant des peintures à base de plomb Symboles Capacités maximales Description fonctionnelle et spécificationsRabot Assemblage Évacuation DES CopeauxFers DE Rabot Démontage DES Mini Fers AU Carbure DE TungstèneInstallation ET Réglage DES MINI-FERS AU Carbure Méthode D’INSTALLATIONConversion Pour L’UTILISATION DE Fers EN Acier Rapide DE Leurs CONTRE-FERSMéthode Démontage DES Grandes Lames EN Acier RapideRaffûtage DES Fers EN Acier Rapide Alignement DES Fers EN Acier RapideInstructions d’utilisation RabotageGuide Inclinable DE Luxe ReposoirDébouchage DU Système D’ÉVACUATION DES Copeaux Courroie DE Transmission Guide DE Largeur ParallèleButée DE Profondeur Pour Feuillures Accessoires ServiceEntretien NettoyageNormas de seguridad para herramientas mecánicas Area de trabajoSeguridad eléctrica Seguridad personalNormas de seguridad para cepillos mecánicos ServicioPage Símbolos De Ni-CdDescripción funcional y especificaciones Cepillo mecánicoEnsamblaje Extracción DE VirutasCuchillas DE Cepillo Mecánico DE TungstenoInstalación Y Ajuste DE LAS Minicuchillas DE Carburo Procedimiento DE InstalaciónLCONVERSIÓN a Cuchillas DE Acero DE Alta VelocidadInstalación DE LAS Cuchillas DE AAV Y LOS Retenedores ProcedimientoReafilado DE LAS Cuchillas DE AAV Nivelación DE LAS Cuchillas DE AAVInstrucciones de funcionamiento Interruptor Gatillo DE Encendido Y ApagadoAcción DE Acepillado Profundidad DE Corte Y Velocidad DE AvanceTOPE-GUÍA Angular DE Lujo Base DE Apoyo DE EstacionamientoDesatascado DEL Sistema DE Salida DE Virutas Correa DE Transmisión TOPE-GUÍA DE Anchura ParaleloTope DE Profundidad DE Rebajado Limpieza MantenimientoAccesorios Page Page Page Limited Warranty of Bosch Portable and Benchtop Power Tools

1594 specifications

Bosch Appliances has long been synonymous with quality, innovation, and reliability in the home appliance sector, and the Bosch Appliances 1594 model continues this tradition. Designed for those who seek optimal performance and cutting-edge technology, the 1594 offers a range of features that cater to modern kitchen needs.

One of the standout characteristics of the Bosch Appliances 1594 is its impressive energy efficiency. This model utilizes advanced engineering and energy-saving technologies that comply with strict energy standards, making it an eco-friendly choice for environmentally conscious consumers. Its efficient operation not only reduces energy consumption but also helps lower utility bills.

Another notable feature of the Bosch Appliances 1594 is its quiet operation. The appliance is equipped with a powerful yet remarkably silent motor, allowing users to enjoy a peaceful kitchen environment. This is particularly beneficial during late-night cooking sessions or family gatherings where conversation is key.

In terms of design, the Bosch Appliances 1594 boasts a sleek and modern aesthetic that fits seamlessly into any contemporary kitchen. The stainless steel finish not only enhances the appliance's appearance but also provides durability and easy maintenance. The well-thought-out interior layout maximizes space while allowing for easy access to all items stored within.

Technologically, the Bosch Appliances 1594 incorporates smart features that streamline everyday tasks. It often comes with a user-friendly interface, including touch controls and intuitive settings that simplify the cooking process. Many users appreciate features like multi-cooking options, allowing them to prepare various dishes simultaneously without sacrificing flavor or quality.

The Bosch 1594 model is also equipped with advanced cooking technologies, such as convection cooking, which promotes even heat distribution for perfectly cooked meals. This feature is especially beneficial for baking and roasting, ensuring consistent results every time.

Safety is another priority with the Bosch Appliances 1594. It comes with several safety features, including child locks and automatic shut-off options, giving users peace of mind while cooking.

Overall, the Bosch Appliances 1594 embodies the brand's commitment to combining functionality with stylish design. Its remarkable energy efficiency, quiet operation, smart technology, and safety features make it a standout choice for anyone looking to upgrade their culinary experience. Whether you are an amateur cook or a seasoned chef, the Bosch Appliances 1594 is engineered to meet and exceed your kitchen needs, making it a worthwhile investment for any home.
Top Page Image Contents