Safety Rules for Planers

Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.

Do not use tool if switch does not turn it “ON” or “OFF”. Any tool that cannot be controlled with the switch is dangerous and must be repaired.

Disconnect the plug from the power source before making any adjustments, changing accessories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally.

Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users.

Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. Any alteration or modification is a misuse and may result in a dangerous condition.

Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools

operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. Develop a periodic maintenance schedule for your tool.

Use only accessories that are recommended by the manufacturer for your model. Accessories that may be suitable for one tool, may become hazardous when used on another tool.

Service

Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. For example: internal wires may be misplaced or pinched, safety guard return springs may be improperly mounted.

When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of electric shock or injury. Certain cleaning agents such as gasoline, carbon tetrachloride, ammonia, etc. may damage plastic parts.

Secure the material being planed. Never hold it in your hand or across legs. Small workpiece must be adequately secured so that the rotating planer blades will not pick it up during forward motion of the planer. Unstable support can cause the blades to bind causing loss of control and injury.

Make sure the spring operated automatic retracting rabbet guard returns to blade covering position instantly. The blades are hidden from view and you may be cut if blade is contacted.

Always start the plane before blade is in contact with the workpiece and allow the blade to come to full speed. Tool can vibrate or chatter if blade speed is too slow at beginning of cut and possibly kickback.

Check the workpiece for nails, if there are nails, either remove or set them well below intended finished surface. If the planer blades strike objects like nails it may cause the tool to kickback and serious personal injury may result.

Never leave the trigger locked “ON”. Unplug the planer before changing accessories. Before plugging the tool in, check that the trigger lock is "OFF". Accidental start-ups may occur if planer is plugged in while changing an accessory.

After changing blades, rotate the blade drum to make sure blades are not hitting any part of the blade head housing and the blade locking screws are tight. Spinning blades could strike tool housing and damage tool as well as possible injury.

-3-

1594 specifications

Bosch Appliances has long been synonymous with quality, innovation, and reliability in the home appliance sector, and the Bosch Appliances 1594 model continues this tradition. Designed for those who seek optimal performance and cutting-edge technology, the 1594 offers a range of features that cater to modern kitchen needs.

One of the standout characteristics of the Bosch Appliances 1594 is its impressive energy efficiency. This model utilizes advanced engineering and energy-saving technologies that comply with strict energy standards, making it an eco-friendly choice for environmentally conscious consumers. Its efficient operation not only reduces energy consumption but also helps lower utility bills.

Another notable feature of the Bosch Appliances 1594 is its quiet operation. The appliance is equipped with a powerful yet remarkably silent motor, allowing users to enjoy a peaceful kitchen environment. This is particularly beneficial during late-night cooking sessions or family gatherings where conversation is key.

In terms of design, the Bosch Appliances 1594 boasts a sleek and modern aesthetic that fits seamlessly into any contemporary kitchen. The stainless steel finish not only enhances the appliance's appearance but also provides durability and easy maintenance. The well-thought-out interior layout maximizes space while allowing for easy access to all items stored within.

Technologically, the Bosch Appliances 1594 incorporates smart features that streamline everyday tasks. It often comes with a user-friendly interface, including touch controls and intuitive settings that simplify the cooking process. Many users appreciate features like multi-cooking options, allowing them to prepare various dishes simultaneously without sacrificing flavor or quality.

The Bosch 1594 model is also equipped with advanced cooking technologies, such as convection cooking, which promotes even heat distribution for perfectly cooked meals. This feature is especially beneficial for baking and roasting, ensuring consistent results every time.

Safety is another priority with the Bosch Appliances 1594. It comes with several safety features, including child locks and automatic shut-off options, giving users peace of mind while cooking.

Overall, the Bosch Appliances 1594 embodies the brand's commitment to combining functionality with stylish design. Its remarkable energy efficiency, quiet operation, smart technology, and safety features make it a standout choice for anyone looking to upgrade their culinary experience. Whether you are an amateur cook or a seasoned chef, the Bosch Appliances 1594 is engineered to meet and exceed your kitchen needs, making it a worthwhile investment for any home.