GTO SL-1000, SL-2000 installation manual Table of Contents

Page 3

TABLE OF CONTENTS

Gate Operator Class Categories --------------------------------------------------------

inside cover

Important Safety Instructions -----------------------------------------------------------

page 1

Important Safety Instructions for the System Designer ----------------------------

page 2

Important Safety Instructions for the Installer --------------------------------------

page 2

Secondary means of Protection Against Entrapment -------------------------------

page 4

Important Safety Instructions for the Consumer/End User ------------------------

page 5

Warning Labels and Signs -------------------------------------------------------------

page 7

Technical Specifications for SL-1000 ---------------------------------------------------

page 9

Technical Specifications for SL-2000 ---------------------------------------------------

page 10

Parts Identification (Single Gate Operator) ------------------------------------------

page 11

Single Gate Operator Installation ------------------------------------------------------

page 12

Overview and Gate Preparation -------------------------------------------------------

page 12

Suggested Conduit & Wiring and Mounting the Legs -----------------------------

page 13

Determining the Mounting Position and Mounting the Operator ----------------

page 14

Installing the Chain ---------------------------------------------------------------------

page 15

Disconnecting Operator Chain for Manual Operation of Gate -------------------

page 15

Powering the System ----------------------------------------------------------------------

page 16

Maximum Operational Cycles Chart -------------------------------------------------

page 16

Installation of the Transformer --------------------------------------------------------

page 16

Control Board settings --------------------------------------------------------------------

page 20

DIP Switches ---------------------------------------------------------------------------------

page 20

Potentiometers -------------------------------------------------------------------------------

page 21

Connecting the Receiver to the Control Board --------------------------------------

page 22

Setting Your Personal Transmitter Code -------------------------------------------------

page 22

Mounting the Receiver ----------------------------------------------------------------------

page 23

Adjusting the Limit Switches ------------------------------------------------------------

page 24

Connecting Safety Devices ---------------------------------------------------------------

page 25

Connecting Accessories -------------------------------------------------------------------

page 26

Maintenance ---------------------------------------------------------------------------------

page 28

Troubleshooting Guide --------------------------------------------------------------------

page 29

Warranty and Repair Information -----------------------------------------------------

page 31

Dual Gate System Installation -----------------------------------------------------------

page 32

Preparing the Gates ---------------------------------------------------------------------

page 34

Wiring the Second Operator -----------------------------------------------------------

page 35

Setting the Control Board for Dual Gate Installations -----------------------------

page 36

Accessory Catalog --------------------------------------------------------------------------

page 38

Installation Check List --------------------------------------------------------

inside back cover

Image 3
Contents Automatic Gate Operator Vehicular Gate Operator Class Categories When You Know Multiply By To Find SymbolTable of Contents Important Safety Instructions For the System Designer For the InstallerBefore Installation II. During InstallationIII. After Installation Secondary Means of Protection Against Entrapment Entrapment Alarm UL 325No ONE should Cross the Path of the Moving Gate For the CONSUMER/END UserPoint hazard Required Safety Precautions for GatesSeries Moving Gate Can Cause Injury Or Death GTO PRO SL-1000 Series Technical Specifications GTO PRO SL-2000 Series Technical Specifications Parts Identification Single Gate Operator Installation Overview of Operator InstallationGate Preparation Mounting the Legs on the Slide Gate Operator Recommended Wiring and USE of ConduitOperator side of the gate see Overview Illustration, Determining the Mounting Position and Mounting the OperatorTo Open the Gate Manually Installing the ChainPowering the System Connecting the BatteryInstallation of the GTO Transformer Estimated Maximum Number of Cycles Per Day Solar Zones and Gate ActivityStep 18VAC Another see Illustration KRight Control Board SettingsPotentiometers Setting the Personal Transmitter Code FCC Regulation Mounting the ReceiverCounter Clockwise Adjusting the Limit SwitchesIf your gate opens from Right to Left However, if your gate opens from Left to RightConnecting Additional Safety Devices Connecting Safety DevicesORG Orange Used with GRN Green Connecting AccessoriesWHT White Used with GRN Green BLU Blue Used with GRN GreenAttaching the Housing Is especially important for safety devices MaintenanceMaintenance Trouble Shooting GuideConnected to these terminals System Test SpecificationsWarranty and Repair Service Limited Two Year WarrantyInstructions for the Installation Dual Slide Gate System Second Gate Auxiliary Operator Parts & Hardware Dual Gate System InstallationControl Unit This Step is for SL-2000/ 2200 Installation only Wiring the Second OperatorRefer to the illustrations on the next Setting the Control Board for Dual Gate InstallationsStep GTO Digital Keypad F300 Accessories Available Through Your DealerACCESS-ORIES Replacement Batteries Installation of this operator conforms to Class Installation Check List

SL-1000, SL-2000 specifications

The GTO SL-2000 and SL-1000 are advanced gate operators designed for efficient and reliable automation of heavy-duty swing gates. These models are renowned for their robust construction and innovative technologies that enhance both performance and security.

The SL-2000 is particularly suited for large, dual-swing gates weighing up to 2,000 pounds, making it a perfect choice for commercial and industrial settings. In comparison, the SL-1000 is designed for lighter gates that weigh up to 1,000 pounds, suitable for residential and light commercial applications. Both models are engineered to provide smooth, quiet operation, which is vital for residential areas where noise reduction is essential.

One of the standout features of both the SL-2000 and SL-1000 is their advanced DC motor technology. This allows for variable speed operation, providing a slower, more controlled movement during the opening and closing cycles. Such functionality not only enhances safety but also minimizes wear and tear on the gate mechanism, ensuring longevity.

Both models are equipped with obstacle detection technology that halts the gate's movement if an obstruction is encountered. This safety feature helps prevent accidents and damage, a critical aspect in environments where individuals and vehicles are present.

In terms of installation, the GTO SL series is designed for ease of use, featuring a straightforward setup process with clear instructions and minimal tools required. Additionally, the SL-2000 and SL-1000 include a built-in rechargeable battery backup, ensuring that the gate operates even during power outages.

Security is a top priority with both gate operators. They incorporate rolling code technology in their remote controls, which changes the access code with each activation, significantly reducing the risk of unauthorized access. Furthermore, the SL series supports multiple remote controls, allowing for convenient access for users while maintaining security.

Durability is another hallmark of the GTO SL-2000 and SL-1000. Both operators are built with weather-resistant materials, ensuring they can withstand various environmental conditions. This resilience makes them a solid investment for long-term use.

In conclusion, the GTO SL-2000 and SL-1000 are state-of-the-art gate operators that combine cutting-edge technology with superior safety features, making them a reliable choice for enhancing the automation of swing gates in diverse applications. Their ease of installation, robust construction, and advanced functionalities are significant advantages for property owners seeking secure and efficient access solutions.