GTO SL-2000, SL-1000 installation manual Series

Page 10

IMPORTANT SAFETY INSTRUCTIONS

These warning labels should be found at the locations specified below. If any of them are missing, immediately contact your installer for replacements.

!WARNING

•Fingers, hands, and loose clothing may be dragged into chain sprockets.

•Fingers and hands can

be injured by rotating sprockets.

• Keep hands, fingers,

and loose clothing away from chain and chain opening in operator housing.

warning labels (3). Located on both sides and back of operator housing

￿￿

￿￿

SL

Series

￿￿￿￿￿￿

 

Conforms to UL 325 STANDARDS

 

Certified to CAN/CSA-C22.2 No.247-92

 

Maximum Gate: 500 lb. (226.7 kg); 30 ft. (9.1 m)

 

Voltage: 12 Vdc; Frequency: 0 Hz; Power: 93.2 W

Class I, II and III Vehicular Slide Gate Operator

Serial Number: SL1000-xxxxxxx

Disconnect operator ONLY when the gate is NOT moving.

TO MANUALLY OPEN AND CLOSE THE GATE:

1.Lift quick release pins UP, then pull them OUT of chain brackets.

2.Lay chain down and manually slide gate to desired position.

GTO, Inc. Tallahassee, Florida USA

RB2001

!WARNING

•Moving parts inside are capable of causing injury to fingers and hands.

•DO NOT remove operator housing.

•Consult your safety manual before making adjustments.

•For service, call an experienced technician.

AUTOMATIC GATE OPENERS 1-800-543-GATE

warning label located on front of operator housing

!WARNING

• Fingers, hands, and loose clothing may be dragged into chain sprockets.

• Fingers and hands can be injured by rotating sprockets.

• Keep hands, fingers, and loose clothing away from chain and sprockets.

warning label located on top of control box

￿

￿

￿￿

Series

￿￿￿￿￿￿

Conforms to UL 325 STANDARDS

 

Certified to CAN/CSA-C22.2 No.247-92

 

 

 

Maximum Gate: 1000 lb. (453.4 kg); 30 ft. (9.1 m)

 

 

 

Voltage: 12 Vdc; Frequency: 0 Hz; Power: 93.2 W

 

 

 

Class I, II and III Vehicular Slide Gate Operator

 

 

 

Serial Number: SL2000-xxxxxxx

 

 

 

 

Disconnect operator ONLY when the gate is NOT moving.

TO MANUALLY OPEN AND CLOSE THE GATE:

1.Lift quick release pins UP, then pull them OUT of chain brackets.

2.Lay chain down and manually slide gate to desired position.

GTO, Inc. Tallahassee, Florida USA

RB2002

product identification and manual operation instruction label installed on control box cover

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Automatic Gate Operator When You Know Multiply By To Find Symbol Vehicular Gate Operator Class CategoriesTable of Contents Important Safety Instructions II. During Installation For the InstallerBefore Installation For the System DesignerIII. After Installation Entrapment Alarm UL 325 Secondary Means of Protection Against EntrapmentFor the CONSUMER/END User No ONE should Cross the Path of the Moving GateRequired Safety Precautions for Gates Point hazardSeries Moving Gate Can Cause Injury Or Death GTO PRO SL-1000 Series Technical Specifications GTO PRO SL-2000 Series Technical Specifications Parts Identification Overview of Operator Installation Single Gate Operator InstallationGate Preparation Recommended Wiring and USE of Conduit Mounting the Legs on the Slide Gate OperatorDetermining the Mounting Position and Mounting the Operator Operator side of the gate see Overview Illustration,Installing the Chain To Open the Gate ManuallyConnecting the Battery Powering the SystemInstallation of the GTO Transformer Solar Zones and Gate Activity Estimated Maximum Number of Cycles Per DayStep Another see Illustration K 18VACControl Board Settings RightPotentiometers Setting the Personal Transmitter Code Mounting the Receiver FCC RegulationHowever, if your gate opens from Left to Right Adjusting the Limit SwitchesIf your gate opens from Right to Left Counter ClockwiseConnecting Safety Devices Connecting Additional Safety DevicesBLU Blue Used with GRN Green Connecting AccessoriesWHT White Used with GRN Green ORG Orange Used with GRN GreenAttaching the Housing Maintenance Is especially important for safety devicesTrouble Shooting Guide MaintenanceSystem Test Specifications Connected to these terminalsLimited Two Year Warranty Warranty and Repair ServiceInstructions for the Installation Dual Slide Gate System Dual Gate System Installation Second Gate Auxiliary Operator Parts & HardwareControl Unit Wiring the Second Operator This Step is for SL-2000/ 2200 Installation onlySetting the Control Board for Dual Gate Installations Refer to the illustrations on the nextStep Accessories Available Through Your Dealer GTO Digital Keypad F300ACCESS-ORIES Replacement Batteries Installation Check List Installation of this operator conforms to Class

SL-1000, SL-2000 specifications

The GTO SL-2000 and SL-1000 are advanced gate operators designed for efficient and reliable automation of heavy-duty swing gates. These models are renowned for their robust construction and innovative technologies that enhance both performance and security.

The SL-2000 is particularly suited for large, dual-swing gates weighing up to 2,000 pounds, making it a perfect choice for commercial and industrial settings. In comparison, the SL-1000 is designed for lighter gates that weigh up to 1,000 pounds, suitable for residential and light commercial applications. Both models are engineered to provide smooth, quiet operation, which is vital for residential areas where noise reduction is essential.

One of the standout features of both the SL-2000 and SL-1000 is their advanced DC motor technology. This allows for variable speed operation, providing a slower, more controlled movement during the opening and closing cycles. Such functionality not only enhances safety but also minimizes wear and tear on the gate mechanism, ensuring longevity.

Both models are equipped with obstacle detection technology that halts the gate's movement if an obstruction is encountered. This safety feature helps prevent accidents and damage, a critical aspect in environments where individuals and vehicles are present.

In terms of installation, the GTO SL series is designed for ease of use, featuring a straightforward setup process with clear instructions and minimal tools required. Additionally, the SL-2000 and SL-1000 include a built-in rechargeable battery backup, ensuring that the gate operates even during power outages.

Security is a top priority with both gate operators. They incorporate rolling code technology in their remote controls, which changes the access code with each activation, significantly reducing the risk of unauthorized access. Furthermore, the SL series supports multiple remote controls, allowing for convenient access for users while maintaining security.

Durability is another hallmark of the GTO SL-2000 and SL-1000. Both operators are built with weather-resistant materials, ensuring they can withstand various environmental conditions. This resilience makes them a solid investment for long-term use.

In conclusion, the GTO SL-2000 and SL-1000 are state-of-the-art gate operators that combine cutting-edge technology with superior safety features, making them a reliable choice for enhancing the automation of swing gates in diverse applications. Their ease of installation, robust construction, and advanced functionalities are significant advantages for property owners seeking secure and efficient access solutions.
Top Page Image Contents