Allstar Products Group MVP-SQ Improper Adjustment, Unavailable, use a stiff cardboard

Page 16
W A R N I N G
THE SENSITIVITY SYSTEM REVERSING TEST
SHOULD BE PERFORMED MONTHLY TO
ENSURE THAT THIS IMPORTANT SYSTEM
REMAINS IN PROPER ADJUSTMENT.

OPERATION AND ADJUSTMENT INSTRUCTIONS

16

STEP 1: Testing the Limit Settings: To check the Limit Settings, start the Opener by pushing the standard wall Push Button or Super Station. Be prepared to activate the button again quickly - per the Operating Parameters outlined above - or if you see that the door is going to over travel. As illustrated above, move the Cams toward the Power Unit to DECREASE door travel and toward the Front Idler to INCREASE door travel. Adjust the Up Limit Cam so that the door comes to rest where it normally would without an electric Opener. Adjust the Down Limit Cam so that the door closes firmly without putting undue stress on the Door Arm. At full closed position, the door arm assembly should compress approximately one inch.

108407

WARNING

IF LIMITS ARE NOT

ADJUSTED

PROPERLY, THE

EMERGENCY RELEASE MECHANISM MAY NOT WORK PROPERLY AND DOOR OPERATION COULD

RESULT IN DOOR

DAMAGE, SERIOUS

PERSONAL INJURY OR

DEATH!

STEP 2: Adjusting the Sensitivity Force — Sensitivity System force adjustment screws are located on the side rails of the Power Unit and can easily be adjusted with a screwdriver. Turn the screws CLOCKWISE for more force and COUNTERCLOCKWISE for less force.

104391

CLOSE FORCE

ADJUSTMENT

OPEN

FORCE

ADJUSTMENT

STEP 3: Testing the Sensitivity Force — To test the Sensitivity System, start the Opener and grasp the bottom door handle halfway through the door's travel (opening or closing). When testing in the CLOSE direction, a second person will be needed to maintain pressure on the Push Button IF an Auxiliary Entrapment Protection Device has not yet been fitted. If a second person is

unavailable, use a stiff cardboard

carton placed in the door's downward

path to indicate the force the Opener is

W A R N I N G

IMPROPER ADJUSTMENT OF

SENSITIVITY SYSTEM FORCE COULD CAUSE ENTRAPMENT, INJURY OR DEATH. SET ADJUSTMENTS FOR JUST ENOUGH FORCE TO OPERATE THE DOOR RELIABLY, BUT NO STRONGER. Contact a service professional to correct any binding, sticking or other door problems. DO NOT OVER-ADJUST SENSITIVITY SYSTEM TO COMPENSATE FOR A POORLY WORKING DOOR.

exerting. If the force adjustment screws are properly set, the door should stop if opening, and reverse if closing without exerting undue pressure.

STEP 4: Testing the Opener’s Reversing System — To test the Opener's Reversing Feature at floor level, place a solid object at least 1-1/2" thick (such as a standard 2 X 4 board laid flat) on the ground where the center of the door will contact it. Close the door. If the

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Residential Vehicular Garage Door Operator Product Features Tools Required for InstallationAssembly Instructions Component IdentificationPackaged separately Locate the Outer Trolley half packagedDoor Type Identification Important Installation Instructions Installing the Opener Mounting the FrontUsing the Push Straps in the slots closest to the front. Mounting mayReturn to the Tee Rail/Front Mounting Forward and thenInstalling the Operator Alternate Strut Connecting Bracket Cut to FitOr Instructions Set the outer trolley to re-engage, seeInstall Installation of the Super Station Installation of a Standard Wall Push ButtonControl and Auxiliary Equipment First, press Hold the + button. RED LED will turn on Next, while continuing toHole the + button, press and hold the button LED starts to blink Immediately releaseLight will serve as a status indicator during Recode new Enable button on the Super StationPanel of the power head Button when the red LED lightInstallation of 2 Wire Safe Finish Photosystem Final Installation Moving Downward Alternate Action Operation Operation and Adjustment InstructionsUpward Movement Radio Operation Improper Adjustment Unavailable, use a stiff cardboardAccessory System could Enable a Garage Door To Close on People or PROPERTY, CausingDamaged or Malfunctioning Photoelectric Serious Injury or DeathWiring Diagram Troubleshooting Guide Universal Wiring Capabilities. The SafeManufacturer’s Limited Warranty

MVP-SQ, MVP specifications

Allstar Products Group has established itself as a leading provider of innovative consumer products, with its MVP and MVP-SQ lines standing out in the market for their exceptional quality and functionality. These products have been meticulously engineered to meet the diverse needs of consumers while setting a new benchmark for performance.

The MVP line is renowned for its versatility and user-friendly design. It incorporates advanced technologies that enhance efficiency and effectiveness, making it ideal for both professional and casual use. One of the standout features of the MVP is its ergonomic design, ensuring comfort during extended use. This thoughtful design reduces strain and fatigue, allowing users to make the most out of their experience.

With a focus on durability, the MVP is crafted from high-quality materials. This ensures longevity, even in demanding conditions. Additionally, the MVP showcases a range of innovative technologies, such as smart sensors and automatic adjustments that allow it to adapt to various tasks seamlessly. These features contribute to its reputation as a reliable tool for everyday tasks and specialized applications alike.

On the other hand, the MVP-SQ version elevates this concept further with added functionality tailored for specific use cases. This model integrates sophisticated technology that optimizes performance in specialized settings. The MVP-SQ is designed to tackle more complex challenges, making it perfect for professionals requiring precision and reliability.

Among the key characteristics of both models is their easy maintenance and clean-up. This is particularly appealing to consumers seeking convenience, as it allows for effortless upkeep after use. Furthermore, both MVP and MVP-SQ exhibit a sleek aesthetic, combining modern design with practicality, which is attractive for consumers who value style.

In conclusion, Allstar Products Group's MVP and MVP-SQ lines embody the perfect blend of technology, durability, and user-centric design. With their innovative features and attention to detail, these products are sure to meet the needs of an array of consumers, from casual users to industry professionals. Investing in either the MVP or MVP-SQ means opting for quality and performance that stand the test of time.
Top Page Image Contents