Allstar Products Group MVP-SQ owner manual Installing the Opener, Mounting the Front

Page 6

INSTALLING THE OPENER

104369

VERTICAL

 

CENTERLINE

HORIZONTAL

LINE

VERTICAL

CENTERLINE

104371

HIGH ARC (RISE)

HORIZONTAL LINE

LAG SCREWS 5/16” X 1-7/8”

6

STEP 1: Mounting the Front

Bracket — Mark a vertical centerline on the header above the door. By manually raising the door, determine the high arc of the door’s travel (see illustrations on page 4) and using a level, transfer this measurement to the header (see illustration at left). Draw a horizontal line, crossing the previously drawn centerline, at this point. Install the Front Mounting Bracket securely with the lag screws as illustrated below. If necessary, reinforce the header with steel angle iron or wood to ensure a secure mount.

 

FRONT MOUNTING BRACKET MUST BE INSTALLED TO A

 

STRUCTURAL SUPPORT (STUD) ON THE HEADER WALL.

 

FAILURE TO DO SO COULD CAUSE SENSING SYSTEM TO

 

MALFUNCTION, RESULTING IN ENTRAPMENT, INJURY

WARNING

OR DEATH. REINFORCE HEADER IF NECESSARY USING

 

A 2 x 6 AND LAG SCREWS (NOT PROVIDED).

STEP 2: Raise the Tee Rail so that the Front Idler Bracket and Front Mounting Bracket align. Insert bolt and tighten nut loosely for now. Later in the installation, this nut must be tightened securely.

STEP 3: Raise the Opener and rest the

 

Power Unit on a ladder or other sturdy support.

 

Open the door to the full open position. Allow

 

2" of space between the Tee Rail and the top

 

section of the door (as shown in the illustration

 

on the top of page 7, left).

104372

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Residential Vehicular Garage Door Operator Product Features Tools Required for InstallationPackaged separately Assembly InstructionsComponent Identification Locate the Outer Trolley half packagedDoor Type Identification Important Installation Instructions Installing the Opener Mounting the FrontReturn to the Tee Rail/Front Mounting Using the PushStraps in the slots closest to the front. Mounting may Forward and thenOr Instructions Installing the OperatorAlternate Strut Connecting Bracket Cut to Fit Set the outer trolley to re-engage, seeInstall Installation of a Standard Wall Push Button Installation of the Super StationControl and Auxiliary Equipment Hole the + button, press and hold the button First, press Hold the + button.RED LED will turn on Next, while continuing to LED starts to blink Immediately releasePanel of the power head Light will serve as a status indicator during Recode newEnable button on the Super Station Button when the red LED lightInstallation of 2 Wire Safe Finish Photosystem Final Installation Operation and Adjustment Instructions Moving Downward Alternate Action OperationUpward Movement Radio Operation Improper Adjustment Unavailable, use a stiff cardboardDamaged or Malfunctioning Photoelectric Accessory System could Enable a Garage DoorTo Close on People or PROPERTY, Causing Serious Injury or DeathWiring Diagram Troubleshooting Guide Universal Wiring Capabilities. The SafeManufacturer’s Limited Warranty

MVP-SQ, MVP specifications

Allstar Products Group has established itself as a leading provider of innovative consumer products, with its MVP and MVP-SQ lines standing out in the market for their exceptional quality and functionality. These products have been meticulously engineered to meet the diverse needs of consumers while setting a new benchmark for performance.

The MVP line is renowned for its versatility and user-friendly design. It incorporates advanced technologies that enhance efficiency and effectiveness, making it ideal for both professional and casual use. One of the standout features of the MVP is its ergonomic design, ensuring comfort during extended use. This thoughtful design reduces strain and fatigue, allowing users to make the most out of their experience.

With a focus on durability, the MVP is crafted from high-quality materials. This ensures longevity, even in demanding conditions. Additionally, the MVP showcases a range of innovative technologies, such as smart sensors and automatic adjustments that allow it to adapt to various tasks seamlessly. These features contribute to its reputation as a reliable tool for everyday tasks and specialized applications alike.

On the other hand, the MVP-SQ version elevates this concept further with added functionality tailored for specific use cases. This model integrates sophisticated technology that optimizes performance in specialized settings. The MVP-SQ is designed to tackle more complex challenges, making it perfect for professionals requiring precision and reliability.

Among the key characteristics of both models is their easy maintenance and clean-up. This is particularly appealing to consumers seeking convenience, as it allows for effortless upkeep after use. Furthermore, both MVP and MVP-SQ exhibit a sleek aesthetic, combining modern design with practicality, which is attractive for consumers who value style.

In conclusion, Allstar Products Group's MVP and MVP-SQ lines embody the perfect blend of technology, durability, and user-centric design. With their innovative features and attention to detail, these products are sure to meet the needs of an array of consumers, from casual users to industry professionals. Investing in either the MVP or MVP-SQ means opting for quality and performance that stand the test of time.
Top Page Image Contents