Allstar Products Group MVP-SQ owner manual Operation and Adjustment Instructions

Page 15

15OPERATION AND ADJUSTMENT INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

WARNING! TO REDUCE THE RISK OF SEVERE INJURY OR DEATH

READ AND FOLLOW ALL INSTRUCTIONS!

•NEVER LET CHILDREN OPERATE OR PLAY WITH DOOR CONTROLS. KEEP THE REMOTE CONTROL AWAY FROM CHILDREN.

•ALWAYS KEEP A MOVING DOOR IN SIGHT AND KEEP PEOPLE AND OBJECTS AWAY FROM THE DOOR AREA UNTIL THE DOOR IS COMPLETELY CLOSED. NO ONE SHOULD CROSS THE PATH OF A MOVING DOOR.

•NEVER GO UNDER A STOPPED, PARTIALLY OPEN DOOR.

•TEST THE DOOR OPENER MONTHLY. THE DOOR MUST REVERSE UPON CONTACT WITH A 1-1/2” HIGH OBJECT (OR A 2 X 4 BOARD LAID FLAT) ON THE FLOOR. AFTER ADJUSTING THE SENSITIVITY OR THE LIMIT OF TRAVEL, ALWAYS RETEST THE OPENER. FAILURE TO ADJUST THE

OPENER PROPERLY MAY RESULT IN SERIOUS INJURY OR DEATH.

•IF POSSIBLE, USE THE EMERGENCY RELEASE ONLY WHEN THE DOOR IS CLOSED. USE CAUTION WHEN USING THE RELEASE WITH THE DOOR OPEN. WEAK OR BROKEN SPRINGS MAY ALLOW THE DOOR TO CLOSE RAPIDLY, CAUSING SEVERE INJURY OR DEATH.

•KEEP THE GARAGE DOOR PROPERLY BALANCED. SEE THE DOOR OWNER'S MANUAL. AN IMPROPERLY BALANCED DOOR MAY CAUSE SEVERE INJURY OR DEATH. HAVE A QUALIFIED SERVICE PERSON MAKE REPAIRS TO CABLES, SPRING ASSEMBLIES AND OTHER HARDWARE.

•SAVE THESE INSTRUCTIONS!

TURNING ON POWER TO THE OPENER

...FULLY CLOSED, then pushing the wall Push Button or the radio control will cause the door to begin

MOVING UPWARD.

NOTE: It is now necessary to turn on the power in order to run the opener to test the operation and check the limit settings. Before doing so, ensure that all mounting hardware is installed and has been properly tightened, that all electrical connections are per local code requirements, and that proper wiring practices have been followed. Also, double-check that all ropes have been removed from the door and that the doorway is clear.

BASIC OPERATING PARAMETERS

Please note the following Operating Parameters which apply to Openers with Auxiliary Entrapment Protection System (Safe Finish™ Photosystem, Installation Instructions on Page 15) and a standard wall push button connected. Please see page 17 for instructions concerning the Super Station Deluxe Wall Push Button operating parameters.

IF THE DOOR IS…

...FULLY OPEN, then pushing the standard wall Push Button or the radio control will cause the door to begin

MOVING DOWNWARD.

...MOVING UPWARD, then pushing the wall Push Button will cause the door to STOP. The next push of the wall button will cause the door to begin

MOVING DOWNWARD (Alternate Action Operation).

...MOVING UPWARD, then pushing the radio control will cause the door to STOP. The next push of the wall button will cause the door to RESUME

UPWARD MOVEMENT (Radio Operation).

...MOVING DOWNWARD, then pushing the wall Push Button or the radio control will cause the door to

STOP, PAUSE FOR APPROXIMATELY ONE SECOND, AND THEN BEGIN MOVING UPWARD.

...MOVING DOWNWARD then reaches the down limit, the lamp will blink off for a 1/2 second then turn back on again, remaining on for 4 minutes 30 seconds and will then automatically turn off.

...MOVING UPWARD then reaches the open limit, the lamp will remain on for 4 minutes 30 seconds and will then automatically turn off.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Residential Vehicular Garage Door Operator Tools Required for Installation Product FeaturesLocate the Outer Trolley half packaged Assembly InstructionsComponent Identification Packaged separatelyDoor Type Identification Important Installation Instructions Mounting the Front Installing the OpenerForward and then Using the PushStraps in the slots closest to the front. Mounting may Return to the Tee Rail/Front MountingSet the outer trolley to re-engage, see Installing the OperatorAlternate Strut Connecting Bracket Cut to Fit Or InstructionsInstall Installation of a Standard Wall Push Button Installation of the Super StationControl and Auxiliary Equipment LED starts to blink Immediately release First, press Hold the + button.RED LED will turn on Next, while continuing to Hole the + button, press and hold the buttonButton when the red LED light Light will serve as a status indicator during Recode newEnable button on the Super Station Panel of the power headInstallation of 2 Wire Safe Finish Photosystem Final Installation Operation and Adjustment Instructions Moving Downward Alternate Action OperationUpward Movement Radio Operation Unavailable, use a stiff cardboard Improper AdjustmentSerious Injury or Death Accessory System could Enable a Garage DoorTo Close on People or PROPERTY, Causing Damaged or Malfunctioning PhotoelectricWiring Diagram Universal Wiring Capabilities. The Safe Troubleshooting GuideManufacturer’s Limited Warranty

MVP-SQ, MVP specifications

Allstar Products Group has established itself as a leading provider of innovative consumer products, with its MVP and MVP-SQ lines standing out in the market for their exceptional quality and functionality. These products have been meticulously engineered to meet the diverse needs of consumers while setting a new benchmark for performance.

The MVP line is renowned for its versatility and user-friendly design. It incorporates advanced technologies that enhance efficiency and effectiveness, making it ideal for both professional and casual use. One of the standout features of the MVP is its ergonomic design, ensuring comfort during extended use. This thoughtful design reduces strain and fatigue, allowing users to make the most out of their experience.

With a focus on durability, the MVP is crafted from high-quality materials. This ensures longevity, even in demanding conditions. Additionally, the MVP showcases a range of innovative technologies, such as smart sensors and automatic adjustments that allow it to adapt to various tasks seamlessly. These features contribute to its reputation as a reliable tool for everyday tasks and specialized applications alike.

On the other hand, the MVP-SQ version elevates this concept further with added functionality tailored for specific use cases. This model integrates sophisticated technology that optimizes performance in specialized settings. The MVP-SQ is designed to tackle more complex challenges, making it perfect for professionals requiring precision and reliability.

Among the key characteristics of both models is their easy maintenance and clean-up. This is particularly appealing to consumers seeking convenience, as it allows for effortless upkeep after use. Furthermore, both MVP and MVP-SQ exhibit a sleek aesthetic, combining modern design with practicality, which is attractive for consumers who value style.

In conclusion, Allstar Products Group's MVP and MVP-SQ lines embody the perfect blend of technology, durability, and user-centric design. With their innovative features and attention to detail, these products are sure to meet the needs of an array of consumers, from casual users to industry professionals. Investing in either the MVP or MVP-SQ means opting for quality and performance that stand the test of time.
Top Page Image Contents