Allstar Products Group MVP-SQ owner manual Installing the Operator, Or Instructions

Page 8

INSTALLING THE OPERATOR

8

FIBERGLASS, ALUMINUM OR LIGHTWEIGHT STEEL GARAGE

DOORS WILL REQUIRE REINFORCEMENT BEFORE

INSTALLATION OF DOOR MOUNTING BRACKET. CONTACT CAUTION! YOUR DOOR MANUFACTURER FOR A REINFORCEMENT KIT

OR INSTRUCTIONS.

DOOR ARM CONNECTION AND INSTALLATION

NOTE: If the door is of light construction it is necessary to reinforce the center stile with steel angle or wood to prevent damage to the door if it encounters an obstruction on closing.

Step 7: Connecting Door Arm to Trolley

Release the outer trolley slide such as to effect manual operation, see Page 7.

The door arm assembly consists of the door arm tube section and door arm rod which are packaged separately. To assemble, screw the door arm rod into the the door arm tube in a clockwise direction approximately ten turns. Connect the door arm rod to the trolley ensuring the hook end goes through both holes on the front end of the outer trolley.

110054-2

Alternate Strut

Connecting Bracket

Cut to Fit

Step 8: Connecting the Door Arm to the Door

Type 1: Door Mounted Bracket

Visually align the door arm connecting hole with the middle hole of the door bracket by rotating the tube section in the appropriate direction.

Release the trolley (leave door arm attached) with the manual release cord and pull trolley toward the power head unit. Now rotate the door arm tube section two turns counterclockwise (increasing the exposed length of the door rod) to provide a cushion when the door is closed or encounters an obstruction. Align connecting hole in the door arm to middle hole in the door bracket; insert 3/8” diameter bolt and tighten locking nut, allowing for free pivot of the arm.

Note: Do not overtighten locking nut as this will cause binding between the door arm and door bracket.

Type 2: Strut Mounted Bracket

Visually align the door arm connecting hole with the connecting pin of the strut by rotating the tube section in the appropriate direction.

Release the trolley (leave door arm attached) with the manual release cord and pull trolley toward the power head unit. Now rotate the door arm tube section two turns counter-clockwise (increasing the exposed length of the door rod) to provide a cushion when the door is closed or encounters an obstruction. Align connecting hole in the door arm with the strut mounted connecting bracket. Insert connecting pin through the hole in the door arm. Secure the connecting pin to the strut bracket according to the manufacturer’s instructions.

Note: Door Bracket Mount or Strut Mount - If rod bottoms in cushion tube, cut rod to allow for proper function of this assembly.

Set the outer trolley to re-engage, see page 7.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Residential Vehicular Garage Door Operator Product Features Tools Required for InstallationAssembly Instructions Component IdentificationPackaged separately Locate the Outer Trolley half packagedDoor Type Identification Important Installation Instructions Installing the Opener Mounting the FrontUsing the Push Straps in the slots closest to the front. Mounting mayReturn to the Tee Rail/Front Mounting Forward and thenInstalling the Operator Alternate Strut Connecting Bracket Cut to FitOr Instructions Set the outer trolley to re-engage, seeInstall Control and Auxiliary Equipment Installation of a Standard Wall Push ButtonInstallation of the Super Station First, press Hold the + button. RED LED will turn on Next, while continuing toHole the + button, press and hold the button LED starts to blink Immediately releaseLight will serve as a status indicator during Recode new Enable button on the Super StationPanel of the power head Button when the red LED lightInstallation of 2 Wire Safe Finish Photosystem Final Installation Upward Movement Radio Operation Operation and Adjustment InstructionsMoving Downward Alternate Action Operation Improper Adjustment Unavailable, use a stiff cardboardAccessory System could Enable a Garage Door To Close on People or PROPERTY, CausingDamaged or Malfunctioning Photoelectric Serious Injury or DeathWiring Diagram Troubleshooting Guide Universal Wiring Capabilities. The SafeManufacturer’s Limited Warranty

MVP-SQ, MVP specifications

Allstar Products Group has established itself as a leading provider of innovative consumer products, with its MVP and MVP-SQ lines standing out in the market for their exceptional quality and functionality. These products have been meticulously engineered to meet the diverse needs of consumers while setting a new benchmark for performance.

The MVP line is renowned for its versatility and user-friendly design. It incorporates advanced technologies that enhance efficiency and effectiveness, making it ideal for both professional and casual use. One of the standout features of the MVP is its ergonomic design, ensuring comfort during extended use. This thoughtful design reduces strain and fatigue, allowing users to make the most out of their experience.

With a focus on durability, the MVP is crafted from high-quality materials. This ensures longevity, even in demanding conditions. Additionally, the MVP showcases a range of innovative technologies, such as smart sensors and automatic adjustments that allow it to adapt to various tasks seamlessly. These features contribute to its reputation as a reliable tool for everyday tasks and specialized applications alike.

On the other hand, the MVP-SQ version elevates this concept further with added functionality tailored for specific use cases. This model integrates sophisticated technology that optimizes performance in specialized settings. The MVP-SQ is designed to tackle more complex challenges, making it perfect for professionals requiring precision and reliability.

Among the key characteristics of both models is their easy maintenance and clean-up. This is particularly appealing to consumers seeking convenience, as it allows for effortless upkeep after use. Furthermore, both MVP and MVP-SQ exhibit a sleek aesthetic, combining modern design with practicality, which is attractive for consumers who value style.

In conclusion, Allstar Products Group's MVP and MVP-SQ lines embody the perfect blend of technology, durability, and user-centric design. With their innovative features and attention to detail, these products are sure to meet the needs of an array of consumers, from casual users to industry professionals. Investing in either the MVP or MVP-SQ means opting for quality and performance that stand the test of time.
Top Page Image Contents