Brother CS6000I Replacing the Needle, Needle precautions, Needle types and their uses, Fabrics

Page 21

KNOWING YOUR SEWING MACHINE —————————————————————————————————————————

REPLACING THE NEEDLE

This section provides information on sewing machine needles.

Needle precautions

Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions is extremely dangerous. Be sure to read and carefully follow the instructions below.

CAUTION

Only use home sewing machine needles. Use of any other needle may bend the needle or damage the machine.

Never use bent needles. Bent needles can easily break, possibly resulting in injury.

Needle types and their uses

The sewing machine needle that should be used depends on the fabric and thread thickness. Refer to the following table when choosing the thread and needle appropriate for the fabric that you wish to sew.

Fabric Type/Application

Thread

 

Size of Needle

Type

 

Size

 

 

 

 

 

 

 

 

 

 

Medium

Broadcloth

Cotton thread

 

6080

 

Taffeta

Synthetic thread

 

 

weight

 

 

75/11–90/14

fabrics

Flannel,

Silk thread

 

5080

 

 

Gabardine

 

 

 

 

 

 

 

Thin

Lawn

Cotton thread

 

6080

 

Georgette

Synthetic thread

 

65/9–75/11

fabrics

 

 

 

Challis, Satin

Silk thread

 

5080

 

Thick

Denim

Cotton thread

 

3050

 

Corduroy

Synthetic thread

 

 

90/14–100/16

fabrics

 

50

 

Tweed

Silk thread

 

 

 

 

 

 

Stretch

Jersey

 

 

5060

Ball point needle

fabrics

Tricot

Thread for knits

 

(golden colored)

 

 

 

75/11–90/14

 

 

Cotton thread

 

 

 

 

 

 

5080

 

Easily frayed fabrics

Synthetic thread

 

65/9–90/14

 

 

Silk thread

 

 

 

For top-stitching

Synthetic thread

 

30

90/14–100/16

Silk thread

 

 

 

 

 

 

 

 

 

 

 

 

Memo

The smaller the thread number, the thicker the thread; and the larger the needle number, the thicker the needle.

Use the ball point needle when sewing on stretch fabrics or fabrics where skipped stitches easily occur.

Use a 90/14 to 100/16 needle with transparent nylon threads, regardless of the fabric being sewn.

A 75/11 needle is already installed when the sewing machine is purchased.

20

Image 21
Contents Computerized Sewing Machine For Users in the UK, EIRE, Malta and Cyprus only For safe operation For a longer service lifeContents Utility Stitches Main parts Names of Machine Parts and Their FunctionsNeedle and presser foot section Operation buttonsButtons provided on some models Operation panel Flat bed attachmentASlideopen theit. flat bed attachment to the left to Optional accessories AccessoriesPower supply precautions Using Your Sewing MachineBSet the main power switch to CTo turn off the machine, set the main power switch toChanging the needle stop position Foot controllerWinding the bobbin Threading the MachinePass the thread around the pre-tension disk ETurn on the sewing machineGTrim the excess thread above the bobbin CSlide the bobbin winder shaft to the right For models equipped with the fast bobbin winding systemActual size 11.5mm 7/16 inch This model Lower threadingFor models equipped with the quick-set bobbin Right side see arrow b until the cover clicks into placeUpper threading Thread take-up lever Catch the thread on the hook as shown below DFully lower the needle threader leverDrawing up the lower thread For models equipped with the quick-set bobbinLightly hold the end of the upper thread Replacing the Needle Needle precautionsNeedle types and their uses FabricsReplacing the needle Checking the needleCorrect needle Incorrect needleInstalling the needle clamp Twin needle threading Sewing with a twin needleReplacing the Presser Foot Replacing the presser footMark on the wheel points up. With models Removing the presser foot holder Removing the presser foot holderAttaching the presser foot holder Remove the presser footSewing General sewing procedureSelecting stitching DIfwidth.necessary, adjust the stitch lengthTurn on the sewing machine CAttach the presser footStarting to sew On the wheel points up. With models equippedBRaise the presser foot lever Sewing reinforcement stitches Thread tensionCorrect tension Upper tension is too tightTrial sewing Useful Sewing TipsChanging the sewing direction Sewing curvesSewing thin fabrics Using a free-arm styleSewing stretch fabrics Slide the flat bed attachment to the left to release itAttach overcasting foot G or zigzag foot J Select a stitch Overcasting StitchesBasic Stitching When sewing is finished, cut the threadBasic stitching Changing the needle positionBlind HEM Stitching BAttach blind hem foot R CSelect a stitchIf the needle does not catch the hem fold Buttonholes can be sewn and buttons can be sewn on Buttonhole SewingIf the button does not fit in the button guide plate Size of the buttonhole is setFPullpossible.down the buttonhole lever as far as Button sewing Sewing buttonholes on stretch fabricsCAttach presser foot M With stitch Select stitch ESelect a stitchRev. Reverse Zipper InsertionSewing Stretch Fabrics and Elastic Tape Stretch stitchingElastic attaching Appliqués APPLIQUÉ, Patchwork and Quilt StitchingPiecing Patchwork crazy quilt stitchingQuilting Using the optional quilting guideBaste the fabric to be quilted DSelect stitch , orGAfter sewing is finished, slide the feed dog Free-motion quiltingTriple stretch stitching Reinforcement StitchingBar tack stitching Attach zigzag foot J Select stitch Start sewingPullpossible.down the buttonhole lever as far as Once sewing is completed,Decorative Stitching Fagoting Scallop stitchingDTrim along the stitches Shell tuck stitching SmockingSew parallel stitching at intervals of 1 cm 3/8 inch DPull the bobbin threads to create gathersJoining Heirloom stitchingUnfold the fabric, and then iron the tucks down to one side Utility stitches Stitch SettingsRfc. Reinforcement Pattern No Rfc Binding Appendix Maintenance Cleaning the machine surfaceCleaning the bobbin case Remove the bobbin case Troubleshooting Or breaks LowerThread ten Fabric isSkipped Stitches areThere is a high Pitched noise While sewingOperation beep for models equipped with the operation beep Error MessagesNumerics Index30, 32 English 885-S33/S34/S36/S37 XC8835-4216