12 www.electrolux.com
SETTING THE HEATING
FUNCTION
1.Touch 
. The display shows a sym- bol, the number of the heating function and the preset temperature.
2.Touch 
or 
to set a heating func- tion.
3.Touch 
or the appliance starts au- tomatically after five seconds.
If you activate the appliance with 
and do not set a heating func- tion or programme, the appliance deactivates automatically after 20
seconds.
CHANGING THE
TEMPERATURE
Touch 
or 
to change the tempera- ture in steps of 5 °C.
When the appliance is at the set tempera- ture, an acoustic signal sounds three times. The
CHECKING THE TEMPERATURE
You can see the temperature in the appli- ance when the function or programme op- erates.
1.Touch 
.
The Temperature/Time display shows the temperature in the appliance.
If you want to change the tempera- ture, touch 
one more time and use 
or 
.
2.Touch 
to go back to the set tem- perature. If not, the display shows it automatically after five seconds.
FAST HEAT UP FUNCTION
The Fast Heat Up function decreases the
Activating the Fast Heat Up function:
Touch and hold 
for more than three sec- onds.
If you activate the Fast Heat Up function, the bars on the display 
flash one by one to show that the function operates.
Useful information
•Do not put food into the appliance when the Fast Heat Up function operates.
•The Fast Heat Up function is not availa- ble with every heating function. An acoustic signal sounds if the Fast Heat Up function is not available for the set function.
STEAM COOKING
The water drawer cover is in the control panel.
1.Press the cover to open the water drawer.
2.Fill the water drawer with 800 ml of water.
The water supply is sufficient for ap- proximately 50 minutes.
Do not put water directly into the steam generator!
Use only water as the liquid. Do not use filtered (demineralised) or distil- led water.
3.Activate the appliance.
4.Touch 
until the display shows 
.
5.Touch 
to set the DURATION or END function (refer to "Setting the END" or "Setting the DURATION"). The first steam shows after approximately 2 minutes. An acoustic signal sounds when the appliance is at approximately the set temperature.
The signal sounds again at the end of the cooking time.
6.Touch 
to deactivate the acoustic signal and the appliance.
When the steam generator is emp- ty, an acoustic signal sounds.
When the appliance cools down, soak up all remaining water from the steam genera- tor with the sponge. If necessary, clean the steam generator with some vinegar.
Let the appliance dry fully with the door open.
ENERGY SAVING
The appliance contains features which help you save energy during everyday cooking: