USING THE ACCESSORIES
WARNING!
Refer to "Safety information" chap- ter.
CORE TEMPERATURE SENSOR
The core temperature sensor measures the core temperature of the meat. When the meat is at the set temperature, the appli- ance deactivates.
There are two temperatures to set:
•The oven temperature: refer to the table for roasting in the recipe book.
•The core temperature: refer to the table for the core temperature sensor in the recipe book.
Only use the core temperature sen- sor supplied or the correct replace- ment parts.
1.Activate the appliance.
2.Put the point of the core temperature
sensor (with 
on the handle) into the centre of the meat.
3.Put the plug of the core temperature sensor into the socket at the front of the appliance.
The display shows 
flashing and the default set core temperature. The temperature is 60 °C for the first oper- ation, and the last set value for each subsequent operation.
4.Touch 
or 
to set the core tem- perature.
5.Touch 
or the settings save auto- matically after 5 seconds.
ENGLISH 17
You can set the core temperature
only when 
flashes. If 
is in the display but does not flash be- fore you set the core temperature,
touch 
and 
or 
to set a new value.
6.Set the heating function and, if neces- sary, the oven temperature.
The display shows the current core
temperature and 
, which shows the relation between the set oven tempera- ture and the current oven temperature.
The core temperature sensor must stay in the meat and in the socket during the cooking.
While the appliance calculates the approximate duration time, the val- ue of the Count Up Timer function shows in the Timer / Residual heat display. When the first calculation ends, the Timer/Residual heat dis- play shows - and then the approxi- mate duration of the cooking.
The appliance continues to calcu- late the duration during the cook- ing. The display updates at inter- vals with the new duration value.
7.When the meat is at the set core tem- perature, the core temperature and
flash. An acoustic signal sounds for two minutes.
Touch a sensor field to deactivate the acoustic signal.
8.Remove the core temperature sensor from the socket and remove the meat from the appliance.
WARNING!
Be careful when you remove the core temperature sensor. It is hot. There is a risk of burns.
9.Deactivate the appliance.
When you put the core tempera- ture sensor into the socket, you cancel the settings for the clock functions.