Electrolux EBGL70 user manual What to do IF…, Problem Possible cause Solution

				ENGLISH 25
WHAT TO DO IF…
	WARNING!
	Refer to "Safety information" chap-
	ter.
	Problem	Possible cause		Solution
	The appliance does not	The appliance is deactiva-	Activate the appliance.
	heat up.	ted.
	The appliance does not	The time of day is not set.	Set the clock. Refer to
	heat up.		"First setting the time of
			day".
	The appliance does not	The necessary settings are	Make sure that the set-
	heat up.	not set.	tings are correct.
	The appliance does not	The automatic switch-off	Refer to „Automatic
	heat up.	is activated.	switch-off“.
	The appliance does not	The fuse is released.	Make sure that the fuse is
	heat up.		the cause for the malfunc-
			tion. If the fuse releases
			again and again, refer to
			an authorized electrician.
	The lamp does not oper-	The lamp is defective.	Replace the lamp.
	ate.
	The display shows an er-	There is an electronic fault.	•	Deactivate the appli-
	ror code that is not in this			ance with the house
	list.			fuse or the safety switch
				in the fuse box and acti-
				vate it again.
			•	If the display shows the
				error code again, refer
				to the Service Center.

The appliance is activated and does not heat up. The fan does not operate. The display shows “Demo”.

The test mode is activa- ted.

1.Deactivate the appli- ance.

2.Touch and hold until the appliance ac- tivates and deacti- vates.

3.Touch and hold

and at the same time until an acoustic signal sounds and “Demo” goes out.

If you cannot find a solution to the problem	The necessary data for the service centre is
yourself, contact your dealer or the service	on the rating plate. The rating plate is on
centre.	the front frame of the appliance cavity.

We recommend that you write the data here:

Model (MOD.).........................................

Product number (PNC).........................................