Electrolux EBGL70 Care and Cleaning, Steam Cleaning, Shelf Supports, Removing the shelf support

Page 22

22 www.electrolux.com

CARE AND CLEANING

WARNING!

Refer to "Safety information" chap- ter.

Notes on cleaning:

•Clean the front of the appliance with a soft cloth with warm water and a clean- ing agent.

•To clean metal surfaces, use a usual cleaning agent.

•Clean the oven interior after each use. Then you can remove dirt more easily and it does not burn on.

•Clean stubborn dirt with a special oven cleaner.

•Clean all oven accessories after each use and let them dry. Use a soft cloth with warm water and a cleaning agent.

•If you have nonstick accessories, do not clean them using aggressive agents, sharp-edged objects or a dishwasher. It can cause a damage to the nonstick coating.

STEAM CLEANING

1.Remove the worst of the dirt manually.

2.Put approximately 250 ml of water and 3 tablespoons of vinegar directly into the steam generator.

3.Activate the appliance.

4.Touch until the display shows .

5.The display shows the duration and default temperature. Touch OK to start the cleaning.

6.An acoustic signal sounds when the steam cleaning is completed.

Touch a sensor field to stop the signal.

7.Clean the appliance with a soft cloth.

Remove water from the steam genera- tor with the sponge and rub it dry.

Keep the door open for approxi- mately 1 hour to let the appliance dry fully.

You can use the End function to delay the start of the cleaning. Re- fer to "Setting the END".

SHELF SUPPORTS

You can remove the shelf supports to clean the side walls.

Removing the shelf support

1. Carefully pull the support up and out of the front catch.

Image 22

Contents EBGL70 EN Oven Customer Care and Service ContentsWE’RE Thinking of YOU Electrical connection Safety InformationInstallation Risk of suffocation, injury or perma- nent disabilitySteam Cooking Care and CleaningUSE Internal LightDisposal Product Description AccessoriesWire shelf Baking trayCore temperature sensor To measure how far the food is cookedBefore First USE Initial Cleaning PreheatingFirst Setting the Time DAY First Connection to MainsElectronic Programmer Control PanelFunction Description Field You can examine or change the temperature Other Indicators of DisplayHEAT-UP Indicator DisplayDaily USE Heating function ApplicationChecking the Temperature Setting the Heating FunctionChanging Temperature Fast Heat UP FunctionEnglish Setting the END Count UP TimerSetting the Duration Setting the Minute MinderSetting the Time Delay Function Automatic Programmes Automatic Programmes With Weight InputSetting an automatic recipe Automatic RecipesThere are two temperatures to set Using the AccessoriesCore Temperature Sensor You can set the core temperatureAll accessories have small indentations Inserting the AccessoriesTouch again and again to see three other temperatures To increase safety. Always make sureEnglish MY Favourite Programme Function Settings MenuAdditional Functions Control LockBrightness of the Display Automatic SWITCH-OFFOven temperature Switch-off time Cooling FANShelf Supports Care and CleaningSteam Cleaning Removing the shelf supportCleaning the water drawer and the steam generator Installing the shelf supportsCleaning the Door Steam Generation SystemLamp Problem Possible cause Solution What to do IF…Serial number S.N To lift the appliance, do not use the door handle InstallationInstalling the Oven = appliance = recessElectrical Connection Installing the Oven Under a Work SurfaceMin Connection Diagram 400 Electrical Connection with the HOBCH GARANTIE, GARANZIA, Guarantee Servicestellen Points de Service Servizio dopo VenditaEnvironment Concerns 892934989-B-482011