Electrolux EBGL70 Before First USE, Initial Cleaning Preheating, First Connection to Mains

Page 8

8 www.electrolux.com

BEFORE FIRST USE

WARNING!

Refer to "Safety information" chap- ter.

INITIAL CLEANING AND

PREHEATING

•Remove all parts from the appliance.

•Clean the appliance before first use.

•Heat up the empty appliance at 150°C for 30 minutes with or function

Refer to chapter "Care and Clean- ing".

FIRST CONNECTION TO THE

MAINS

After first connection to the mains all sym- bols in the display are on for some sec- onds. For the subsequent few seconds the display shows software version.

FIRST SETTING THE TIME OF

DAY

After the software version goes off, the dis- play shows "h" and "12:00".

Setting the time of day:

1.Touch or to set hours.

2.Touch .

3.Touch or to set minutes.

4.Touch or .

The Temperature/Time display shows new time.

Changing the time of day

You can change the time of day only if the appliance is off.

Touch . flashes in the display. To set new time of day use the above procedure.

Image 8

Contents EBGL70 EN Oven WE’RE Thinking of YOU ContentsCustomer Care and Service Safety Information InstallationElectrical connection Risk of suffocation, injury or perma- nent disabilityCare and Cleaning USESteam Cooking Internal LightDisposal Accessories Wire shelfProduct Description Baking trayCore temperature sensor To measure how far the food is cookedInitial Cleaning Preheating First Setting the Time DAYBefore First USE First Connection to MainsFunction Description Field Control PanelElectronic Programmer Other Indicators of Display HEAT-UP IndicatorYou can examine or change the temperature DisplayDaily USE Heating function ApplicationSetting the Heating Function Changing TemperatureChecking the Temperature Fast Heat UP FunctionEnglish Count UP Timer Setting the DurationSetting the END Setting the Minute MinderSetting the Time Delay Function Automatic Programmes With Weight Input Setting an automatic recipeAutomatic Programmes Automatic RecipesUsing the Accessories Core Temperature SensorThere are two temperatures to set You can set the core temperatureInserting the Accessories Touch again and again to see three other temperaturesAll accessories have small indentations To increase safety. Always make sureEnglish Settings Menu Additional FunctionsMY Favourite Programme Function Control LockAutomatic SWITCH-OFF Oven temperature Switch-off timeBrightness of the Display Cooling FANCare and Cleaning Steam CleaningShelf Supports Removing the shelf supportInstalling the shelf supports Cleaning the DoorCleaning the water drawer and the steam generator Steam Generation SystemLamp Problem Possible cause Solution What to do IF…Serial number S.N Installation Installing the OvenTo lift the appliance, do not use the door handle = appliance = recessMin Installing the Oven Under a Work SurfaceElectrical Connection Connection Diagram 400 Electrical Connection with the HOBCH GARANTIE, GARANZIA, Guarantee Servicestellen Points de Service Servizio dopo VenditaEnvironment Concerns 892934989-B-482011