Electrolux EBGL70 user manual Automatic SWITCH-OFF, Brightness of the Display, Cooling FAN

Page 21

5.Touch / to change the value of the setting.

6.Touch .

ENGLISH 21

•if a heating function operates.

•if you do not change the oven tempera- ture.

AUTOMATIC SWITCH-OFF

For safety reasons the appliance deacti- vates automatically after some time:

Oven temperature	Switch-off time
30 °C -120 °C	12.5 h.
120 °C - 200 °C	8.5 h.
200 °C -230 °C	5.5 h.
After an automatic switch-off, touch a sen-
sor field to operate the appliance again.
The Automatic switch-off works
with all oven functions, apart from
Light, Low temperature cooking,
Core temperature sensor, Duration,
End, Time delay.

BRIGHTNESS OF THE DISPLAY

There are two modes of the display's brightness:

•Night brightness:

–When the appliance is deactivated, the brightness of the display is lower be- tween 22:00 and 06:00.

•Day brightness:

–When the appliance is activated.

–If you touch a sensor field (apart from ON/OFF) during the night brightness mode, the display goes back to the day brightness mode for the next 10 seconds.

–When the appliance is deactivated and you set the Minute Minder. When the Minute Minder function ends, the dis- play goes back to the night brightness mode.

COOLING FAN

When the appliance operates, the cooling fan activates automatically to keep the sur- faces of the appliance cool. If you deacti- vate the appliance, the cooling fan can continue to operate until the appliance cools down.

Image 21

Contents EBGL70 EN Oven Contents Customer Care and ServiceWE’RE Thinking of YOU Installation Safety InformationElectrical connection Risk of suffocation, injury or perma- nent disabilityUSE Care and CleaningSteam Cooking Internal LightDisposal Wire shelf AccessoriesProduct Description Baking trayTo measure how far the food is cooked Core temperature sensorFirst Setting the Time DAY Initial Cleaning PreheatingBefore First USE First Connection to MainsControl Panel Electronic ProgrammerFunction Description Field HEAT-UP Indicator Other Indicators of DisplayYou can examine or change the temperature DisplayHeating function Application Daily USEChanging Temperature Setting the Heating FunctionChecking the Temperature Fast Heat UP FunctionEnglish Setting the Duration Count UP TimerSetting the END Setting the Minute MinderSetting the Time Delay Function Setting an automatic recipe Automatic Programmes With Weight InputAutomatic Programmes Automatic RecipesCore Temperature Sensor Using the AccessoriesThere are two temperatures to set You can set the core temperatureTouch again and again to see three other temperatures Inserting the AccessoriesAll accessories have small indentations To increase safety. Always make sureEnglish Additional Functions Settings MenuMY Favourite Programme Function Control LockOven temperature Switch-off time Automatic SWITCH-OFFBrightness of the Display Cooling FANSteam Cleaning Care and CleaningShelf Supports Removing the shelf supportCleaning the Door Installing the shelf supportsCleaning the water drawer and the steam generator Steam Generation SystemLamp What to do IF… Problem Possible cause SolutionSerial number S.N Installing the Oven InstallationTo lift the appliance, do not use the door handle = appliance = recessInstalling the Oven Under a Work Surface Electrical ConnectionMin Electrical Connection with the HOB Connection Diagram 400Servicestellen Points de Service Servizio dopo Vendita CH GARANTIE, GARANZIA, GuaranteeEnvironment Concerns 892934989-B-482011