Electrolux EBGL70 Clock Functions, Count UP Timer, Setting the Duration, Setting the END

Page 14

14 www.electrolux.com

CLOCK FUNCTIONS

SYM- FUNCTION

DESCRIPTION

BOL

 

TIME OF DAY

To show the time of day. To change the time of day, re-

 

fer to 'Setting the time of day'.

DURATION

To set how long the appliance operates.

 

 

END

To set when the appliance deactivates. You can use Du-

 

ration and End at the same time (Time delay) if you want

 

the appliance to activate and deactivate automatically

 

later.

 

 

COUNT UP TIMER

Use the Count Up Timer to monitor how long the appliance operates. It starts to count when the appliance starts to heat. Reset the Count Up Timer: Touch and at the same time until the display shows "00:00" and the Count Up Timer starts to count up again.

You cannot use Count Up Timer when Duration or End is set.

SETTING THE DURATION

1.Activate the appliance and set a heat- ing function and temperature.

2.Touch again and again until the dis- play shows .

flashes in the display.

3.Touch or to set the minutes for

DURATION.

4.Touch to confirm.

5.Touch or to set the hours for

DURATION.

If you touch while you set the hours for DURATION, the appli- ance goes to the END function set- ting.

6.When the set time ends, an acoustic signal sounds for two minutes.

and the time setting flash in the dis- play. The appliance deactivates.

Touch a sensor field to stop the acous- tic signal.

7.Deactivate the appliance.

SETTING THE END

1.Activate the appliance and set a heat- ing function and temperature.

2.Touch again and again until the dis- play shows .

flashes in the display.

3.Touch or to set END (first you set the minutes and then the hours)

and to confirm.

4.When the set time ends, an acoustic signal sounds for two minutes.

and the time setting flash in the dis- play. The appliance deactivates.

5.Touch a sensor field to stop the acous- tic signal.

6.Deactivate the appliance.

SETTING THE MINUTE MINDER

Use the MINUTE MINDER to set a count- down (maximum h min). This function has no effect on the operation of the appliance. You can set the MINUTE MINDER at any time and also when the appliance is off.

1.Touch .

and "00" flash in the display.

2.Use or to set the MINUTE MINDER. First you set the seconds and then minutes and hours.

3.Touch and at the same time to reset the set time.

4.Touch or the MINUTE MINDER starts automatically after five seconds.

5.When set time ends, an acoustic signal sounds for two minutes. "00:00" and flash in the display.

Page 13 Page 15
Image 14
Page 13 Page 15
Contents EBGL70 EN Oven WE’RE Thinking of YOU ContentsCustomer Care and Service Electrical connection Safety InformationInstallation Risk of suffocation, injury or perma- nent disabilitySteam Cooking Care and CleaningUSE Internal LightDisposal Product Description AccessoriesWire shelf Baking trayCore temperature sensor To measure how far the food is cookedBefore First USE Initial Cleaning PreheatingFirst Setting the Time DAY First Connection to MainsFunction Description Field Control PanelElectronic Programmer You can examine or change the temperature Other Indicators of DisplayHEAT-UP Indicator DisplayDaily USE Heating function ApplicationChecking the Temperature Setting the Heating FunctionChanging Temperature Fast Heat UP FunctionEnglish Setting the END Count UP TimerSetting the Duration Setting the Minute MinderSetting the Time Delay Function Automatic Programmes Automatic Programmes With Weight InputSetting an automatic recipe Automatic RecipesThere are two temperatures to set Using the AccessoriesCore Temperature Sensor You can set the core temperatureAll accessories have small indentations Inserting the AccessoriesTouch again and again to see three other temperatures To increase safety. Always make sureEnglish MY Favourite Programme Function Settings MenuAdditional Functions Control LockBrightness of the Display Automatic SWITCH-OFFOven temperature Switch-off time Cooling FANShelf Supports Care and CleaningSteam Cleaning Removing the shelf supportCleaning the water drawer and the steam generator Installing the shelf supportsCleaning the Door Steam Generation SystemLamp Problem Possible cause Solution What to do IF…Serial number S.N To lift the appliance, do not use the door handle InstallationInstalling the Oven = appliance = recessMin Installing the Oven Under a Work SurfaceElectrical Connection Connection Diagram 400 Electrical Connection with the HOBCH GARANTIE, GARANZIA, Guarantee Servicestellen Points de Service Servizio dopo VenditaEnvironment Concerns 892934989-B-482011
Top Page Image Contents