Electrolux EBGL70 user manual Connection Diagram 400, Electrical Connection with the HOB

Page 29

ENGLISH 29

D

E

F

Only a qualified person can con- nect the appliance to the electricity supply.

1.Open the mains terminal cover (D).

2.Put the connection cable into the sup- plied rings (E). This is to prevent the cable from rubbing against the drawer. The connection cable is on the housing side.

3.Install the cable grip (F).

4.Connect the terminal as in the illustra- tion.

5.Put the cable into the strain relief clamp.

6.Close the mains terminal cover.

CONNECTION DIAGRAM 400 V

400V 3~			400V 2~
		400V		400V
PE L1 L2 L3			PE L1		L2
1	2	3	1	2	3
	5	4		5	4

Phase definitions: L1, L2, L3 (or R, S,T)

WARNING!

If service is required always discon- nect the appliance from the power supply.

ELECTRICAL CONNECTION WITH THE HOB

You can connect the oven to an independ- ent hob from the current range of Electro- lux and AEG hobs. You can purchase the necessary connection cable separately:

• AK - EB/GKTC (S) 1 m for ceramic hobs.

• AK - EB/GKTCi (S) 1 m for induction hobs.

The hob connection socket is at the top of the oven cabinet.

Image 29

Contents EBGL70 EN Oven WE’RE Thinking of YOU ContentsCustomer Care and Service Installation Safety InformationElectrical connection Risk of suffocation, injury or perma- nent disabilityUSE Care and CleaningSteam Cooking Internal LightDisposal Wire shelf AccessoriesProduct Description Baking trayTo measure how far the food is cooked Core temperature sensorFirst Setting the Time DAY Initial Cleaning PreheatingBefore First USE First Connection to MainsFunction Description Field Control PanelElectronic Programmer HEAT-UP Indicator Other Indicators of DisplayYou can examine or change the temperature DisplayHeating function Application Daily USEChanging Temperature Setting the Heating FunctionChecking the Temperature Fast Heat UP FunctionEnglish Setting the Duration Count UP TimerSetting the END Setting the Minute MinderSetting the Time Delay Function Setting an automatic recipe Automatic Programmes With Weight InputAutomatic Programmes Automatic RecipesCore Temperature Sensor Using the AccessoriesThere are two temperatures to set You can set the core temperatureTouch again and again to see three other temperatures Inserting the AccessoriesAll accessories have small indentations To increase safety. Always make sureEnglish Additional Functions Settings MenuMY Favourite Programme Function Control LockOven temperature Switch-off time Automatic SWITCH-OFFBrightness of the Display Cooling FANSteam Cleaning Care and CleaningShelf Supports Removing the shelf supportCleaning the Door Installing the shelf supportsCleaning the water drawer and the steam generator Steam Generation SystemLamp What to do IF… Problem Possible cause SolutionSerial number S.N Installing the Oven InstallationTo lift the appliance, do not use the door handle = appliance = recessMin Installing the Oven Under a Work SurfaceElectrical Connection Electrical Connection with the HOB Connection Diagram 400Servicestellen Points de Service Servizio dopo Vendita CH GARANTIE, GARANZIA, GuaranteeEnvironment Concerns 892934989-B-482011