Electrolux EBGL70 Installing the shelf supports, Steam Generation System, Cleaning the Door

Page 23

ENGLISH 23

2.Lightly move the support on the front catch inwards.

3.Pull the support out of the rear catch.

Installing the shelf supports

Install the shelf supports in the opposite se- quence.

Cleaning the water drawer and the steam generator:

1.Put the water and vinegar mixture (ap- proximately 250 ml) through the wa- ter drawer into the steam generator.

STEAM GENERATION SYSTEM

CAUTION!

Dry the steam generator after each use. Soak up water with the sponge.

Remove the limescale residue with water and vinegar.

CAUTION!

Chemical de-scaling agents can cause damage to the enamel. Fol- low the instructions of the manu- facturer.

Wait for approximately 10 minutes.

2.Remove the water and vinegar with the sponge.

3.Put clean water (100 - 200 ml) into the water drawer to flush the steam gener- ation system.

4.Remove water from the steam genera- tor with the sponge and rub dry.

5.Keep the door open to let the appli- ance dry fully.

CLEANING THE DOOR

To clean the door remove it.

Image 23
Contents EBGL70 EN Oven WE’RE Thinking of YOU ContentsCustomer Care and Service Risk of suffocation, injury or perma- nent disability Safety InformationInstallation Electrical connectionInternal Light Care and CleaningUSE Steam CookingDisposal Baking tray AccessoriesWire shelf Product DescriptionTo measure how far the food is cooked Core temperature sensorFirst Connection to Mains Initial Cleaning PreheatingFirst Setting the Time DAY Before First USEFunction Description Field Control PanelElectronic Programmer Display Other Indicators of DisplayHEAT-UP Indicator You can examine or change the temperatureHeating function Application Daily USEFast Heat UP Function Setting the Heating FunctionChanging Temperature Checking the TemperatureEnglish Setting the Minute Minder Count UP TimerSetting the Duration Setting the ENDSetting the Time Delay Function Automatic Recipes Automatic Programmes With Weight InputSetting an automatic recipe Automatic ProgrammesYou can set the core temperature Using the AccessoriesCore Temperature Sensor There are two temperatures to setTo increase safety. Always make sure Inserting the AccessoriesTouch again and again to see three other temperatures All accessories have small indentationsEnglish Control Lock Settings MenuAdditional Functions MY Favourite Programme FunctionCooling FAN Automatic SWITCH-OFFOven temperature Switch-off time Brightness of the DisplayRemoving the shelf support Care and CleaningSteam Cleaning Shelf SupportsSteam Generation System Installing the shelf supportsCleaning the Door Cleaning the water drawer and the steam generatorLamp What to do IF… Problem Possible cause SolutionSerial number S.N = appliance = recess InstallationInstalling the Oven To lift the appliance, do not use the door handleMin Installing the Oven Under a Work SurfaceElectrical Connection Electrical Connection with the HOB Connection Diagram 400Servicestellen Points de Service Servizio dopo Vendita CH GARANTIE, GARANZIA, GuaranteeEnvironment Concerns 892934989-B-482011