14Using the Oven
(See also section “Before Using for the First Time”).
3 How to use the clock functions
•After a clock function has been selected, the corresponding function indicator flashes
for about 5 seconds. During this period, the desired times can be set or modified using the 
/ dial.
•When the desired time has been set, the function indicator continues to flash for approx. 5 seconds. After that the function indicator is then lit. The set time begins to run in the background.
•When the clock functions Duration 
and End 
have been completed, the oven functions dial must be turned back to ”0“.
•Using the Display 
button, you can switch between the oven temperature and the time.
3 Checking the time set or remaining.
Press the Selection 
button repeatedly, until the appropriate clock function flashes and the time set or remaining is displayed.
Minute Minder 
1.Press the Selection 
button repeatedly until
the function indicator Minute Minder 
flash- es.
2.Using the 
/ control knob set the desired countdown (max. 99.00minutes).
The function indicator Minute Minder 
lights up.
When 90% of the time set has elapsed, an audi- ble signal sounds.