KitchenAid W10608689A installation instructions Door Removal, Leveling and Alignment, Tools Needed

Door Removal, Leveling and Alignment

Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.

NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the refrigerator and freezer doors. If door removal is necessary, see the instructions below.

IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.

TOOLS NEEDED:

Bubble level; flat-blade screwdriver; ⁵⁄₁₆" wrench; ¹⁄₄", ¹⁄₂", and ⁵⁄₁₆" hex-head socket wrenches

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

4	Top Left Hinge
	A
	A
A. Do Not Remove Screws.

3 Wiring Connection

5Door Removal

6	Top Right Hinge
A
	A
A. Do Not Remove Screws.

7Bottom Hinges (Left and Right)

A

A	B	C
A. Wiring Plugs
B. Wiring Clip
C. Grommets

2	Water Dispenser
	Tubing Connection
	A
	A
	A. Face of Fitting

1 Base Grille

Do Not Remove Screw A (present on some models)

8Leveling

Raise

Lower

A

A. Leveling Screw

9Door Alignment (Bottom Right Hinge)

A Raise

Lower

A. Alignment Screw

4