Bose BOSE151WHT, 151SEW manual Testing the connections, Troubleshooting, Problem What to do

Page 6

The Bose® 151® SE Environmental Speakers

English

4.Connect the speaker on the left side of the listening area to the left amplifier channel (Figure 7). Attach the marked wire to the red (+) terminal. Attach the plain wire to the black

(–) terminal.

5.Connect the speaker on the right side of the listening area to the right amplifier channel. Attach the marked wire to the red (+) terminal. Attach the plain wire to the black (–) terminal.

Note: If your speakers are being connected to your receiver or amplifier as a secondary set of speakers, be sure to make the appropriate connections to the “B” channel.

Figure 7

Example of amplifier rear panel connections

(–) wire

(+) wire

Testing the connections

Set the balance control on your receiver or amplifier to normal (centered) and play some deep bass passages of music through the speakers. Verify that the sound seems to come from a point between the two speakers, and that the bass is full and natural. If not, check your con- nections again; they may be reversed, causing the speakers to play out of phase. Make sure all the wires are connected positive to positive (+ to +) and negative to negative (– to –).

Troubleshooting

Problem

What to do

 

 

 

Neither

1.

Check the settings on your receiver/amplifier. Refer to its owner’s guide for instructions.

speaker plays

2.

If your speakers are connected to the “B” output, check that the “B” output is selected.

 

 

 

Bass or treble

Check the tonal balance setting on your receiver or amplifier.

is weak

 

 

 

 

 

Only one

1.

Make sure the balance control is centered on your receiver/amplifier.

speaker plays

2.

Check the wires connected to the speaker that does not play. Make sure the wires are in good

 

 

 

condition and are firmly connected.

 

 

One speaker

1. Disconnect the working speaker from the receiver or amplifier.

still does not

2.

Switch the cord of the faulty speaker from its original receiver or amplifier jacks to the other set of

play

 

jacks (the working speaker was originally attached to those jacks). If the speaker now works, the

 

 

 

 

problem is your receiver or amplifier. Reconnect the speakers to a working unit. If the speaker still

 

 

does not work, continue.

 

3.

Remove the cord from the working speaker and connect it to the faulty speaker. If the speaker now

 

 

works, the original speaker cord is bad. If the speaker still does not work, the speaker is bad.

 

4.

If trouble persists, contact your authorized Bose dealer, who will arrange for service. Or, contact

 

 

Bose Customer Service. Refer to the list of phone numbers and addresses included in the carton.

 

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Bose 151 SE Environmental Speakers Unpacking Carton contentsBefore you begin For your recordsBefore mounting your speakers Speaker placementRequired tools and materials Speakers mounted on a wallMounting procedure Mounting the bracketsConnecting your speakers to your receiver/amplifier Adjusting speaker angleSpeaker wiring Problem What to do Testing the connectionsTroubleshooting Example of amplifier rear panel connectionsLimited warranty Cleaning your speakersCustomer service Technical informationUdpakning Bose 151 SE-miljøhøjttalereInden De starter OplysningerNødvendige værktøjer og materialer HøjttalerplaceringInden De monterer Deres højttalere Monteringsvejledning Montering af beslageneTilslutning af højttalere til modtager/forstærker Justering af højttalervinkelHøjttalerkabel Problem Gør følgende Afprøvning af tilslutningerneFejlfinding Begrænset garanti KundeserviceRengøring af højttalerne Tekniske oplysningerAuspacken Die Bose 151 SE Environmental SpeakersBevor Sie beginnen Für Ihre UnterlagenBenötigte Werkzeuge und Materialien LautsprecheraufstellungVor der Montage der Lautsprecher Montage Halterung befestigenAnschließen der Lautsprecher an den Receiver/Verstärker Problem Lösung Ausprobieren der AnschlüsseFehlersuche Beschränkte Garantie Reinigen der LautsprecherKundendienst Technische DatenDesembalaje Altavoces ambientales Bose 151 SEAntes de comenzar Para conservar como referenciaMateriales y herramientas necesarios Colocación de los altavocesAntes de instalar los altavoces Procedimiento de instalación Vista desarrollada del altavoz y del soporte de montajeMontaje de los soportes Conexión de los altavoces a un receptor/amplificador Cableado del altavozResolución de problemas Problema AcciónPrueba de las conexiones Garantía limitada Limpieza de los altavocesServicio al cliente Información técnicaDéballage Les enceintes Bose 151 SEAvant de commencer Renseignements à conserverÉquipements et outils nécessaires Emplacement des enceintesAvant d’installer les enceintes Enceintes fixées au murProcédure d’installation Vue éclatée de l’enceinte et du support de montageFixation des supports Branchement des enceintes à l’ampli-tuner/amplificateur Modification de l’orientation de l’enceinteTest des branchements DépannageProblème Mesure corrective Garantie limitée Service clientEntretien des enceintes Informations techniquesDisimballaggio Diffusori ambientali Bose 151 SEPrima di iniziare Informazioni importantiPrima di montare i diffusori Strumenti e materiali necessariCollocazione dei diffusori Diffusori montati su una pareteProcedura di montaggio Montaggio delle staffeCollegamento dei diffusori al ricevitore/amplificatore Risoluzione dei problemi Problema SoluzioneProva dei collegamenti Garanzia limitata Pulizia dei diffusoriAssistenza tecnica Caratteristiche tecnicheUitpakken De Bose 151 SE Environmental SpeakersVoordat u begint Ter noteringVoordat u uw luidsprekers monteert Vereist gereedschap en materiaalPlaatsing van de luidsprekers Luidsprekers op een muur gemonteerdMontageprocedure De beugels monterenDe luidsprekers op uw ontvanger/versterker aansluiten Luidsprekerhoek bijstellenLuidsprekerbedrading Problemen oplossen De aansluitingen testenProbleem Wat te doen Beperkte garantie KlantenserviceSchoonmaken van luidsprekers Technische informatiePacka upp Bose 151 SE högtalareInledning För framtida brukInnan du monterar dina högtalare Väggmonterade högtalareMonteringsprocess Montera fästenaAnsluta högtalarna till din mottagare/förstärkare Justera högtalarvinkelnHögtalarkablar Problem Åtgärd Testa anslutningarnaFelsökning Begränsad garanti KundserviceRengöra högtalarna Teknisk informationPage

151, BOSE151WHT, 151SEW specifications

Bose has long been synonymous with premium audio quality, and their line of outdoor speakers exemplifies this commitment, particularly the Bose 151SEW and 151WHT models. Designed to bring exceptional sound to outdoor settings, these speakers are engineered to withstand the elements while delivering an immersive listening experience.

The Bose 151SEW and 151WHT are designed for versatility. They can be mounted on walls or placed on patios, gardens, or by the poolside, making them ideal for any outdoor gathering. Their sleek, weather-resistant design ensures durability, allowing them to perform in a variety of environmental conditions. These speakers feature a special enclosure that protects them from moisture and UV exposure, so users can enjoy their favorite tunes without worry, rain or shine.

One of the standout features of the Bose 151 series is the Stereo Everywhere speaker performance. This technology is designed to distribute sound evenly across a wide area, filling outdoor spaces with balanced audio. Rather than confining the listening experience to a small sweet spot, the Bose 151 models allow listeners to enjoy consistent sound quality from various positions, making them perfect for social gatherings.

Another key characteristic of the Bose 151SEW and 151WHT is their innovative mounting system. Each speaker includes a unique multi-position bracket that allows for flexible installation. Whether you want them mounted horizontally, vertically, or at an angle, these speakers can adapt to fit the space you have. This flexibility ensures that you get the most out of your outdoor audio experience.

In terms of sound quality, the Bose 151 speakers utilize a combination of high-performance drivers and a proprietary bass reflex port. This setup enables rich, full-range audio with impressive low frequencies that defy expectations for outdoor speakers. Whether you’re listening to music, hosting a barbecue, or cheering on your favorite sports team, the clarity and depth of sound will enhance any outdoor occasion.

In conclusion, the Bose 151SEW and 151WHT are exemplary outdoor speakers that showcase Bose's dedication to quality, durability, and sound innovation. With weather-resistant features, stereo performance, flexible mounting options, and powerful audio capabilities, they are perfect for outdoor enthusiasts looking to elevate their listening experience. For anyone seeking exceptional sound outdoors, the Bose 151 series is a compelling choice that truly delivers on performance.
Top Page Image Contents