KitchenAid 2266877 manual Water System Connection, Plug in Refrigerator

Page 15

5.Using a grounded drill, drill a ¹⁄₄ in. hole in the cold water pipe you have selected.

Push the bulb end of the tubing into the water valve as far as it will go. Slide the nut forward and finger tighten. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

1.

Cold water pipe

5.

Compression sleeve

2.

Pipe clamp

6.

Shutoff valve

3.

Copper tubing

7.

Packing nut

4.Compression nut

6.Fasten the shutoff valve to the cold water pipe with the pipe clamp. Be sure the outlet end is solidly in the ¹⁄₄ in. drilled hole in the water pipe and that the washer is under the pipe clamp. Tighten the packing nut. Tighten the pipe clamp screws carefully and evenly so washer makes a watertight seal. Do not overtighten or you may crush the copper tubing.

7.Slip the compression sleeve and compression nut on the copper tubing as shown. Insert the end of the tubing into the outlet end squarely as far as it will go. Screw compression nut onto outlet end with adjustable wrench. Do not overtighten.

8.Place the free end of the tubing in a container or sink, and turn ON the main water supply. Flush the tubing until water is clear. Turn OFF the shutoff valve on the water pipe. Coil the copper tubing.

9.Route copper tubing to the refrigerator.

Water System Connection

1.Remove the shipping tape from the gray, coiled water tubing on the rear of the refrigerator.

2.Before attaching copper tubing to the refrigerator, flush at least 2 quarts (1.9 L) of water through the copper tubing and into a bucket to get rid of any particles in the water line.

3.Check for leaks around the saddle valve. Do not overtighten clamp or sleeve. This will crush the copper tubing.

4.Make connection to the refrigerator.

Style 1 - Connecting to a Water Line:

Additional Parts Needed: Coupling, ferrule and nut.

Slide the purchased nut, then the purchased ferrule onto the tubing. Push the tubing into the purchased coupling as far as it will go. Slide the nut and ferrule forward. Tighten the nut by hand. Then tighten it with a wrench two more turns. Do not overtighten.

1

2

1.Bulb

2.Nut (provided)

5.Turn shutoff valve ON.

6.Check for leaks. Tighten any nuts or connections (including connections at the valve) that leak.

Plug in Refrigerator

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

1.Set control switch at top of cabinet to the OFF position.

2.Plug into a grounded 3 prong outlet.

 

1

2

3

4

5

6

1.

Line to refrigerator

 

4.

Coupling (purchased)

2.

Nut (provided)

 

5.

Ferrule (purchased)

3.

Bulb

 

 

6.

Nut (purchased)

Style 2 - Connecting to a Water Valve:

NOTE: The water shutoff should be located in the base cabinet on either side of the refrigerator. The right-hand side is recommended. The access hole through the right cabinet must be within ¹⁄₂ in. (12.7 mm) of rear wall.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Built-In RefrigeratorsSide bySide and Bottom Mount Installation GuideGuide D’INSTALLATION Manual DE InstalaciónTable of Contents ÍndiceTable DES Matières Your safety and the safety of others are very important Refrigerator SafetyTop View All models Product DimensionsTools and Parts Side View All modelsWidth of Refrigerator Model Width a as shown above Opening DimensionsLocation Requirements Location PreparationWidth of Opening Model Width a as shown above Electrical Requirements Water Supply RequirementsTipping Radius Bottom Mount Models Door Swing Dimensions Door Swing DimensionsSide Tipping Radius see chart following Side by Side Door Swing DimensionsFactory Panels and Kits Custom Top Grille and Door Panels Door Panels for Non-dispenser ModelsDoor Panels for Dispenser Models Door Panel Routing Refrigerator and Freezer Door PanelsRouting for Custom Top Grille and Door Panels all models Top Grille Panel RoutingFlush Side Panel End View of Side Trim Dimensions Inset Side PanelCustom Side Panels Side by Side and Bottom Mount Side PanelsModel Reduced Tipping Radius Installation InstructionsUnpack Refrigerator Reduce Tipping RadiusWraparound models Install Anti-Tip BoardsInstall New Water Line To install anti-tip boardsPlug in Refrigerator Style 1 Connecting to a Water LineStyle 2 Connecting to a Water Valve Water System ConnectionLevel Refrigerator Install Door PanelsMove Refrigerator to Final Position Lower Leveling LegsAdjust Doors Door Height AdjustmentDoor Alignment Install Decorative Top Panel Door Swing AdjustmentAdding a Decorative Panel to the Top Grille Assembly Install Side Panel Install Base GrilleComplete Installation Su seguridad y la seguridad de los demá s es muy importante Seguridad DEL RefrigeradorHerramientas requeridas Medidas del productoPiezas y herramientas Vista lateral Todos los modelosMedidas de abertura Vista superior Todos los modelosVista frontal para los modelos de dos puertas Vista delantera para los modelos de montaje inferiorCm mín Requisitos de ubicaciónSuministro de agua fría Requisitos eléctricosRequisitos de suministro de agua Método de conexión a tierra recomendadoArco de vuelco hacia adelante igual para todos los modelos Arco de vuelcoMedidas de oscilación de las puertas Medidas de oscilación de dos puertasJuegos de paneles para puertas de fábrica Paneles y juegos de fábricaMedidas de oscilación de las puertas de montaje inferior Juegos de paneles y agarraderas de dos puertasJuego de rejilla superior para modelos envolventes Paneles a la medida para la rejilla Superior y las puertasJuego para rejilla superior Juego para rejilla superior de modelos con panelContorneado del panel de la rejilla superior Paneles de puerta para modelos sin despachadorPaneles de puerta para modelos con despachador Paneles de puertas de refrigerador y congeladorMedidas del adorno lateral visto desde atrás Paneles laterales a la medidaContorneado del panel de la puerta Paneles laterales de dos puertas y de montaje inferiorPanel lateral al ras Instrucciones DE InstalaciónCómo desempacar su refrigerador Panel lateral en relieveModelos con paneles Cómo reducir el arco de vuelcoCómo instalar los tableros anti-vuelco Modelo Arco de vuelco reducidoInstalación de una tubería de agua Nueva Cómo conectar el sistema de aguaCómo instalar los tableros antivuelco Cómo enchufar el refrigerador Ubicación final del refrigeradorEstilo 2 Conexión a una válvula de agua Modelos con panel Patas niveladoras inferioresCómo instalar los paneles de la puerta Cómo nivelar el refrigeradorCómo ajustar las puertas Cómo alinear las puertasCómo ajustar la altura de la puerta Cómo ajustar la oscilación de las puertas Cómo instalar el panel decorativo SuperiorCómo instalar el panel lateral Cómo instalar la rejilla de la baseCómo terminar la instalación Votre sé curité et celle des autres est trè s importante Sécurité DU RéfrigérateurVue latérale Tous les modèles Exigences ’INSTALLATIONDimensions du produit Outillage et pièces nécessairesVue avant pour les modèles côte à côte Dimensions de l’ouverturePréparation de lemplacement Vue de dessus Tous les modèlesRisque dexplosion Exigences d’emplacementSpécifications électriques Spécifications de l’alimentation en eauRayon de basculement Modèles de 48 po 122 cm Dimensions pour le pivotement Des portesRayon de basculement latéral voir le tableau suivant Modèles de 42 po 106 cmEnsemble de la grille supérieure Ensembles de panneaux dorigineEnsembles de panneaux de porte dorigine Ensembles de poignées de porte prolongéesCouleur Ouverture vers Ouverture vers la La gauche Droite Panneaux personnalisés de la grille Supérieure et de portePanneaux de porte pour modèles sans distributeur Panneaux de porte pour modèles avec distributeurPanneaux de porte de réfrigérateur et de congélateur Usinage du panneau de la grille supérieureUsinage du panneau de porte Panneau latéral en affleurement Dimensions pour lusinage du panneau de porte vue latéralePanneaux latéraux personnalisés Panneau latéral inséréPanneau latéral inséré en retrait Instructions ’INSTALLATIONDéballage du réfrigérateur Réduction du rayon de basculementModèles à portes enveloppantes Installation de planches Anti-basculementInstallation des planches antibasculement Modèles à panneauxInstallation d’une nouvelle Canalisation d’eau Raccordement de la canalisation d’eauStyle 2 Raccordement au robinet deau Déploiement des pieds de nivellement Déplacement du réfrigérateur à Lemplacement finalInstallation des panneaux de porte Brancher le réfrigérateurRéfrigérateurs côte à côte Nivellement du réfrigérateurAjustement des portes Alignement des portesAjustement de la hauteur des portes Ajustement de l’ouverture des portesRéfrigérateurs superposés Installation du panneau décoratif Supérieur Installation du panneau latéralAddition dun panneau décoratif à la grille supérieure Achever l’installation Installation de la grille de la baseAll rights reserved 2266877

2266877 specifications

The KitchenAid 2266877 is an essential kitchen appliance that epitomizes convenience, durability, and style. As part of KitchenAid’s renowned lineup, this model is designed to cater to both amateur cooks and seasoned chefs. One of its standout features is the robust motor that ensures efficient mixing and kneading, while maintaining a quiet operation. This powerful motor is complemented by a range of speed settings, allowing users to choose the perfect speed for various tasks, from whipping egg whites to kneading pizza dough.

The construction of the KitchenAid 2266877 is marked by its high-quality materials. The body is crafted from sturdy metal, ensuring longevity and stability during use. Additionally, the mixer’s sleek design makes it an attractive addition to any kitchen countertop. Available in multiple colors, it can easily match different aesthetic preferences, making it as much a decorative piece as a functional appliance.

In terms of technologies, the KitchenAid 2266877 boasts an innovative planetary mixing action. This means that the mixing attachment moves in one direction while the bowl rotates in the opposite direction, ensuring that all ingredients are mixed thoroughly without any manual intervention. This feature is particularly useful for baking, as it promotes an even consistency and reduces the risk of lumps in the mixture.

The appliance comes equipped with different attachments that enhance its versatility. The standard wire whip, flat beater, and dough hook allow users to tackle a wide range of recipes, from delicate meringues to robust bread doughs. Its compatibility with additional attachments like pasta makers and food grinders further expands its functional utility, making it a valuable investment for anyone who enjoys cooking or baking.

Another remarkable characteristic of the KitchenAid 2266877 is its easy-to-use control panel. The intuitive design enables users to adjust speeds and settings effortlessly. Additionally, it features a tilt-head design, allowing for easy access to the bowl and attachments for quick installation and cleaning.

In conclusion, the KitchenAid 2266877 stands out for its powerful performance, durable construction, and versatile capabilities. This mixer is ideal for anyone looking to elevate their culinary skills while enjoying the convenience of a high-quality kitchen appliance. Its combination of technology, functionality, and style makes it a must-have for any kitchen enthusiast.
Top Page Image Contents