Attachments and Accessories
General Information
KitchenAid® Attachments are designed to assure long life. The attachment power shaft and hub socket are of a square design, to eliminate any possibility of slipping during the transmission of power to the attachment. The hub and shaft housing are tapered to assure a snug fit, even after prolonged use and wear. KitchenAid® Attachments require no extra power unit to operate them; the power unit is
See the Use and Care Guide that came with your stand mixer attachments for speed settings and operating time.
| Attachment | Attachment | |
| Knob | ||
|
| Power Shaft‡ | |
Hinged |
| Attachment | |
Hub Cover | ® | ||
|
| Housing | |
Attachment |
|
| |
Hub Socket | Notch | Pin | |
‡Not part of mixer. | |||
Attachment Shaft | |||
| |||
| Housing |
|
General Instructions
To Attach
1.Turn stand mixer off and unplug.
2.Loosen attachment knob by turning it counterclockwise.
3.Flip up hinged hub cover.
4.Insert attachment shaft housing into attachment hub, making certain that attachment power shaft fits into square attachment hub socket. It may be necessary to rotate attachment back and forth. When attachment is in proper position, the pin on the attachment will fit into the notch on the hub rim.
5.Tighten attachment knob by turning clockwise until attachment is completely secured to stand mixer.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
6.Plug into a grounded 3 prong outlet.
16