KitchenAid YKGST300 Before setting the controls, Setting the controls, Set cleaning time optional

Using the Self-Cleaning Cycle

Protective shield around ignitor

•Do not insert any object into the opening of the protective shield that surrounds the ignitor. Also, do not clean this area. Doing either could result in product damage.

•Do not use your cooktop during the Self-Cleaning cycle. Using your cooktop will turn the cycle off.

Before setting the controls

•Make sure clock is set to correct time of day.

•Make sure the oven door is completely closed.

Setting the controls

To start cleaning immediately: 1. Press CLEAN.

A 31⁄2-hour Self-Cleaning cycle will be set. (The first 3 hours are for cleaning, the last 30 minutes are for cooling.)

PRESS	YOU SEE
	ON		O
CLEAN
		HR MIN MIN SEC
		TEMP PROBE TIMED DELAY
	O	CONTROL	CLEAN
			STOP
	F	START ?	COOK TIME

(display shows 31⁄2-hour cleaning cycle)

2. Set cleaning time (optional).			PRESS	YOU SEE
If you want a Self-Cleaning cycle other			4			O
than 31⁄2 hours, press the desired				ON
Number pads for the new time up to					HR MIN MIN SEC
					TEMP PROBE TIMED DELAY
4	1	⁄2 hours.	0	F	CONTROL	CLEAN
					START ?	COOK TIME
				O		STOP
• Use 21⁄2 hours for light soil.				(example shows 4-hour
• Use 31⁄2-41⁄2hours for moderate to			0	cleaning cycle)
	heavy soil.

46