KitchenAid KERA807 KESI901 manual Storage Drawer, Oven Door, To Remove

Page 29

Storage Drawer

The storage drawer can be removed. Before removing, make sure drawer is cool and empty.

To Remove:

1.Pull drawer straight out to the first stop.

2.Lift up the back of the drawer and pull out.

To Replace:

1.Fit the ends of the drawer rails into the guides in the cavity.

2.Slide the drawer closed.

Oven Door

For normal range use, it is not suggested to remove the oven door. However, if removal is necessary, make sure the oven is off and cool. Then, follow these instructions. The oven door is heavy.

To Remove:

1.Open oven door all the way.

2.Flip up the hinge latch on each side.

3.Close the oven door as far as it will shut.

4.Lift the oven door while holding both sides.

Continue to push the oven door closed and pull it away from the oven door frame.

To Replace:

1.Insert both hanger arms into the door.

2.Open the oven door.

You should hear a “click” as the door is set into place.

3.Move the hinge levers back to the locked position. Ensure that the door is free to open and close. If it is not, repeat the removal and installation procedures

Warming Drawer

(on some models)

Remove all items from inside the warming drawer, and allow the unit to cool completely before attempting to remove the drawer.

To Remove:

1.Open drawer to its full open position.

2.Locate the black loops on both sides of the drawer.

A

A.Loop

3.Pull both loops forward at the same time, then pull drawer out another inch.

4.Holding the drawer by its sides, not its front, carefully pull it all the way out.

To Replace:

1.Align the drawer glides with the receiving guides.

2.Push drawer in all the way.

3.Gently open and close the drawer to ensure it is seated properly on the slides.

29

Image 29
Contents PRO Line Series and Architect Series Electric RangeTable of Contents Anti-Tip Bracket Range SafetyImportant Safety Instructions For units with ventilating hood For self-cleaning rangesControl Panel For Standard Knob Controls Model KESI901 Parts and FeaturesRange Electronic Touch Activated System Parts and Features not shown on some modelsCeramicGlass Cooktop USECookware Cookware CharacteristicsHome Canning Cooktop Controls for Electronic Touch Activated SystemKeep Warm Single, Dual and Triple-Size Elements Melt & HoldSetting Recommended USE DUAL-SIZE Element Hot Surface Indicator LightsCooktop Controls for Electronic Knob Control System SimmerSingle and Dual-Size Elements Warm Power on LightsTo Use Single To Use DualCooktopControlsfor Standard KnobControl System Hot Surface Indicator LightSingle and Dual-Size Elements MED- LOTo Use Warm Zone Element Power on LightsElectronicControlPads Electronic Oven ControlOven Displays Style 2 Standard Knob Controls SystemOptions Oven USE TimerAluminum Foil BakewareOven Vent Temperature ProbeTo Change Probe Temperature, Oven Setting Oven Half-Rack with Removable Insert Positioning Racks and BakewareTraditional Cooking Convection CookingBake Variable Temperature BroilingBroil To Bake or RoastEasyconvect Conversion Convection CookingConvection Bake To Convection BakeTo Convection Roast Convection RoastConvectFullMeal Convection BroilTo Convection Broil To Set CycleProofing Bread Sabbath ModeWarming Drawer Settings To Set a Cook Time and Stop Time Delay StartTimed Cooking Warming DrawerWarming Drawer Temperature Chart Self-Cleaning CycleFood Setting Range CareGeneralCleaning To Replace Oven LightsCeramic Glass on some models To Remove Storage DrawerOven Door Troubleshooting Canada Assistance or ServiceU.S.A 9757451 Kitchenaid COOKTOP, BUILT-IN Oven and Range WarrantyKitchenAid will not pay for