Adjusting for proper flame
A. Cooktop burners:
See page 12 – manual burner adjustment on low.
hidden bake
Your electric oven features a hidden bake element. There is no visible element inside the oven; it is located underneath oven floor. Hidden bake provides even heat and easier
Electronic Oven Control
IMPORTANT INFORMATION
1 Clock must be set before any other operation of the oven control is possible.
2Time of day is always displayed in hours:minutes.
3The maximum programmable time for BAKE, BROIL, CONVECTION BAKE, CONVECTION BROIL, TENDERCOOK, COOK TIME AND STOP TIME is 11 hours 59 minutes.
4When the appliance is connected to a power supply or after a power interruption of longer than 2 seconds, the clock and all indicators flash.
5If more than 10 seconds elapse between selections, the program will cancel.
6Functions are identified on the key pad. When a function such as BAKE, BROIL, CONVECTION BAKE, CONVECTION BROIL, CONVECTION, COOK TIME, SELF CLEAN, TIMER or STOP TIME is touched, setup begins. The function indicator flashes. When START is touched, the function indicator glows. The indicator will shut off when STOP is touched or at the end of the oven function.
7Functions are activated by the touch of a finger. The electronic control generates a beep to confirm that your message has been received.
8If the control will not function and there is a glowing indicator light beside the STOP/LOCK function , the control is locked. Touch and hold STOP/LOCK for 3 seconds to remove the lock. See safety measures.
9If there has been a power interruption or failure, the electronic control could either be:
A)“Locked up” (meaning no buttons will function). Reset the main power breaker to the range.
B)Flashing “88:88”. Reset the clock.
18