6.Route the drain hose, as shown, and press the hoses into the drain hose support.
Decide if the drain hoses need to be trimmed. If so, trim them.
Slip a wire clip over each drain hose. Push the hoses into the drain hose connector firmly, 5 clicks.
Position the wire clips between the two positioning ribs on the drain hose connec- tor.
Attach the drain hose connector to the waste tee using the supplied hose clamp.
Attach the drain hose support bracket to the cabinet with a #8 phillips screw at the height shown below.
drain hose support
waste
| water supply |
| |
(70 cm – 82 cm) |
|
wire clip
drain hose connector
waste tee