REMOVING THE SPRAY ARM AND IMPELLER
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug dishwasher or disconnect power.
2.Turn off the water going to the dishwasher.
3.Remove the dishracks and silverware basket from the tub.
5.Rotate the outer ring on the filter plate counterclockwise (CCW) until the slots and tabs in the outer and inner rings align, then lift the filter plate, and remove it from the tub.
To Remove: Turn
Outer Ring CCW
Outer Ring Slot
Inner Ring Tab
Alignment
Marks
6.Rotate the outer ring on the impeller coun- terclockwise (CCW) as far as it will go, then lift the impeller, and remove it from the tub.
To Remove: Turn
Impeller Ring CCW
4.Lift the spray arm off the impeller.
Impeller
Spray Arm
Impeller