KitchenAid KAD-9 manual To disable the Auto Power, To disable the End of Wash Program beeps

Page 41

3.Press the Lock button to increase or de- crease the Rinse Aid setting. The red indicator lights will scroll up to 5, and then start from 1 again.

4.Once you have selected the desired Rinse Aid setting, press the Power button to return to the Normal operating mode.

To disable the Auto Power

The dishwasher is factory-set to automatically power up whenever the drawer is opened, even if the Power pad has not been pressed. The dishwasher will not start washing until the drawer is closed, and the Start/Pause button has been pressed. If you do not want the dishwasher to automatically power up, this feature can be turned off.

1.Enter the Option Adjustment Mode as explained on the previous page.

2.Press the Start/Pause button until its indi- cator light is orange or lavender, depend- ing on the model, and the indicator light for the HI TEMP button is red. If the indicator lights are not on, press the Power button to return to Normal operating mode, and start again.

3.Press the Lock button to turn the Auto Power feature on or off. If all the red lights on the wash program panel are off, the Auto Power feature has been turned off.

4.Press the Power button to return to the Normal operating mode.

Auto Power On

HEAVY NORMAL QUICK LIGHT/ RINSE

CLEAN CHINA

Auto Power Off	HEAVY NORMAL QUICK	LIGHT/	RINSE
	CLEAN	CHINA

To disable the “End of Wash” Program beeps

The dishwasher is factory-set to beep 6 times at the end of the selected wash program. This feature can be disabled.

1.Enter the Option Adjustment Mode as explained on the previous page.

2.Press the Start/Pause button until the indi- cator light is green or blue, depending on the model, and the HI TEMP indicator light is red. If the indicator lights are not on, press the Power button to return to Normal operating mode, and start again.

3.Press the Lock button to turn the “End of Wash” Program beeps on or off. If the “End of Wash” program beeps have been turned off, all the red indicator lights on the wash program panel will be off.

4.Press the Power button to return to the Normal operating mode.

Beeps On	HEAVY NORMAL QUICK	LIGHT/	RINSE
	CLEAN	CHINA
Beeps Off	HEAVY NORMAL QUICK	LIGHT/	RINSE
	HEAVY NORMAL QUICK	LIGHT/	RINSE
	CLEAN	CHINA

3-13

Image 41

Contents Drawer Dishwasher Goals and Objectives ForwardTable of Contents Diagnostics & Troubleshooting General Safety FirstModel Number Model & Serial Number DesignationsSerial Number D D 01 D P PAModel & Serial Number Label Tech Sheet Locations General SpecificationsKitchenAid will not pay for Kitchenaid Dishwasher WarrantyTWO-YEAR Full Warranty Page Parts Supplied GeneralTools and Material Required 32-3/16 34-1/2 Cm 87.8 cm Product DimensionsFrom front Cabinet Dimensions / RequirementsWater Requirements Electrical RequirementsRecommended Ground Method Foragrounded,cord-connecteddishwasherPower Supply Cord Installing the DishwasherSide Extrusion Chassis Trim Edge Lip Top extrusion Direct Wiring Remove the house wiring knockout Side Mounting the Dishwasher Top attaching bracket Drain hose support Waste 27-1/2 32-1/4 Other Plumbing Options For standpipe installationsStandard Toe Kick Front Panels & TOE KickStandard Front Panels Toe kick Custom Front Panels Custom Front Panels DimensionsLay the custom front panel face down Custom Toe Kick Custom Toe Kick DimensionsSystem Overview Filter Plate Drain CycleDrying Cycle LID SystemControl Panels Parts and FeaturesWash System To Clean The Spray ArmDishwasher Systems To Clean The Filter Plate To Clean The Drain FilterSound System Drying SystemFilling The Powdered Detergent Dispenser Using the DishwasherDetergent USE Program Quantities How Much Detergent To UseRinse AID Dispenser Rinse Aid IndicatorFilling The Dispenser How Much Rinse Aid To UsePerformance Tips Wash Programs Program ChartsPausing a Cycle Canceling a Wash CycleChanging a Cycle Or Setting Option Selections AdjustmentsTo enter the Option Adjustment Mode Delay Start ModeTo adjust the Rinse Aid setting Control LockTo disable the End of Wash Program beeps To disable the Auto PowerPage In-Tub Components Component LocationsTub-Mounted Components Cabinet-Mounted ComponentsRemoving the Spray ARM and Impeller On the next Removing the ISOLATOR, BADGE, & Door HandleTo remove the isolator Inner Door Panel Slide Down & Lift Pry Inner Door Panel Up Removing the Drying FAN and Rinse AID LED Slide the rinse aid LED out of its holder Removing the Controller Removing the Rinse AID Detergent Dispenser Removing the Upper or Lower Drawer Rail Air Cover Tab To remove the hall sensor Reassembly Notes Removing the LID Removing the LID Motors To remove the chassis module Removing the Chassis Module and Power CordTo remove the power cord Removing the Water Fill Valves Drying FAN Component TestingWash & Drain Motor Rinse AID and Detergent DispenserTo test the heater, touch the ohmmeter Power Resistor & HeaterLID Motor Water Fill Valves Temperature SensorError Code Display Mode DiagnosticsError Codes Bad Wiring Or Connections Temperature Sensor FailedMoisture / Foreign Matter On Chassis Board Flood Switch PCB Failed Heater ElementWiring Or Connections Bad Moisture Around Temperature SensorWater Supply Valve Turned Off Inlet Valve FailedHardware Output Test Diagnostic ModesTub Home Sensor Test Fast Test CycleResistance Checks Troubleshooting ChartWiring Diagram Page United States Product Specifications Warranty Information Sources