GRILL HEATING ELEMENT
■■ The heating element is
GREASE FILTER
Clean the filter after any cooking!
The grease filter can be removed for cleaning and should be washed regularly in hot soapy water (fig. 19 at page 17). Always dry the filter properly before fitting it back into the oven.
OVEN FLOOR
The oven floor “F” (fig. 41) can be easily removed to facilitate clea- ning.
Remember to replace the floor cor- rectly afterwards.
Be careful not to confuse the tray “L” with the oven floor “F”.
STORAGE COMPARTMENT
The storage compartment is accessi- ble through the pivoting panel (fig. 42).
Do not store flam- mable material in the storage compartment.
Figure 41
L |
F |
Figure 42
REPLACING THE OVEN LIGHT
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
■■ Let the oven cavity and the heating elements to cool down.
■■ Switch off the electrical supply.
■■ Remove the protective cover “A”B A (fig. 43).
■■ Replace the lamp “B” with a new one suitable for high temperatures (300°C) having the following spe- cifications
■■ Refit the protective cover “A”.
NOTE: Oven bulb replacement is not co- vered by your guarantee.
Figure 43
38