DeLonghi DEF905E manual Electronic Clock fig, Normal Cooking Without the USE of the Programmer

Page 33

ELECTRONIC CLOCK (fig. 33)

The programmer is equipped with an elec- tronic clock with illuminated numbers which indicates hours and minutes.

Upon immediate connection of the oven or after a power cut, three zeros will flash on the programmer display.

To set the correct time of day it is necessa-

ry to push the button and then the


or		button until you have set the correct

time (fig. 29).
In another			way push simultaneously the
		two buttons and at the same time
push the			or		button.

Note: If the clock is reset it deletes any pre- viously set programs

NORMAL COOKING WITHOUT THE USE OF THE PROGRAMMER

To manually use the oven, without the aid of the programmer, it is necessary to can-

cel the flashing AUTO by pushing the button (AUTO will be switched off and the

symbol will illuminate - Fig. 34).

Attention: If the AUTO is illuminated (which means a cooking program has alre- ady been inserted), by pushing the button

you cancel the program and return to manual operation.

If the oven is switched on, you must switch off manually.

Figure 34

ELECTRONIC TIMER

The timer program consists only of a buz- zer which may be set for a maximum period of 23 hours and 59 minutes.

If the AUTO symbol is flashing push the

button.

To set the time, push the button and

the or until you obtain the desired

time in the display (fig. 35).

Having finished the setting, the clock hour

will appear on the panel and the symbol will be illuminated.

The countdown will start immediately and may be seen at any moment on the panel

by simply pressing the button .

At the end of the time, the symbol will disappear and the buzzer will sound and continue for approximatley 7 minutes or

until a button is pressed (not the / buttons). After a short time the display will revert back to the time of day.

SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL

The buzzer has 3 different tones and can

be changed by pressing the button, but only when the time of day is displayed.

Figure 35

33

Image 33

Contents DE’LONGHI Product Label Dear CustomerFirst USE of the Oven Important Precautions and Recommendations Page Location Installation500 mm Fitting the Adjustable Feet Levelling the CookerMoving the Cooker ANTI-TILT Bracket Connection of the appliance to earth is mandatory Electrical RequirementsLocating the Area for Electrical Connection Lectric ConnectionConnection of the Power Supply Cable Voltage and Power ConsumptionFeeder Cable Section 230 V 3~, 240 V 3~ 400 V 3N~, 415 V 3N~ 400 V 2N~, 415 V 2N~400 V 3N~ , 415 V 3N~ Electric Diagram Electric Diagram KEY USE and Care Using the Oven for the First TimeGrease Filter Controls description Control PanelPilot lamps Please noteVitroceramic Cooking HOB Vitroceramic HOBHOW to USE the Vitroceramic HOB Important noteHi-Light Single ZoneS fig Hi-light double zoneS figs Second elementDouble Zone Double Zone Oval Safety Hints Cooking Hints Residual Heat IndicatorsElements usage table SettingEconomic Cooking KnobCast Iron CookwareToughened Glass CopperGeneral Features Cooking with FAN Assisted OvenOperating Principles Function Selector Knob Thermostat KnobOven Light Traditional Convection CookingDefrost Convection Cooking with VentilationVentilated Grill Cooking GrillingSterilization Oven CookingRegeneration RoastingGrilling and AU Gratin USE of the GrillRecommended Cooking Temperature Food Gas Shelf CookingPosition Time approx Description of the illuminated symbols Digital Electronic ProgrammerDescription of the buttons Setting the Frequency of the Audible Signal Electronic TimerIf the oven is switched on, you must switch off manually Electronic Clock figAutomatic Oven Cooking Cooking program may be cancelled At any time by pushingSEMI-AUTOMATIC Cooking Enamelled Parts General AdviceInside of Oven Cleaning the Ceramic HOBOven Floor Grill Heating ElementStorage Compartment Replacing the Oven LightPage Removing the Oven Door Servicing the Appliance TroubleshootingPage Page Cod ß1