DeLonghi DEF905E manual ANTI-TILT Bracket

ANTI-TILT BRACKET

Important!

Figure 8

To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it securely to the wall. Make sure you also fit the supplied lock pin to the anti-tilt bracket.

To fit the anti-tilt bracket:

1.After you have located where the co- oker is to be positioned, mark on the wall the place where the two screws

of the anti-tilt bracket have to be fitted.

Please follow the indications given in fig. 8.

2.Drill two 8 mm diameter holes in the wall and insert the plastic plugs sup- plied.

Important!

Before drilling the holes, check that you will not damage any pipes or electrical wires.

0

+25

Figure 9

900 mm
min 220	onfeet adjustment)
	max245
	(depending

3.	Loosely attach the anti-tilt bracket with
	the two screws supplied.
4.	Move the cooker to the wall and adjust
	the height of the anti-tilt bracket so that
	it can engage in the slot on the coo-
	ker’s back, as shown in fig. 8.

Pivoting panel

5.	Tighten the screws attaching the anti-
	tilt bracket.
6.	Push the cooker against the wall so
	that the anti-tilt bracket is fully inserted
	in the slot on the cooker’s back.
7.	Access the bracket and fit the lock pin:
■■ Open the pivoting panel (fig. 9).

■■ Fit the lock pin through the bracket, as shown (fig. 10).

Figure 10

1

Lock pin

Anti-tilt bracket attached on the rear wall

Cooker’s back

■■ Close the pivoting panel.

Slot on the cooker’s back

2

Lock pin correctly fitted

9