Installation Instructions, Water Pressure

Installation Instructions

1.Remove all packing materials carefully. Please note, that plastic bags can be dangerous toys for children !

2.The water inlet hose from the machine terminates in a 3/4” female connector. The water supply should therefore terminate in a similar male connector and must have a stopcock close by in the pipe. Connect the straight connector of the inlet hose to the water supply securely. Connect the other end (bent connector) to the water inlet valve at the back of the dishwasher cabinet. Do not over-tighten to avoid damage to threads.

3.Prepare the drainage hose so that it has hooked end. Use the plastic U-bend fitting provided for this purpose. The end of this should be dropped into a drainage standpipe, the maximum height of which should be no more than 15 cm above the base of the dishwasher. To allow for an air gap around the end of the drain hose, the diameter of the standpipe should be at least 30 mm. Connect the other end of the drain hose (L shaped) to the drain port connection at the back of the dishwasher cabinet. Tighten the drain hose end on to the drain port using the metal clip included in the package.

4.If you so wish, you may connect the water inlet hose on to the kitchen sink tap. You must obtain correct fittings/adaptors to match the inlet hose connectors to ensure secure connection. However, permanent plumbing is recommended.

NOTE: All plumbing work must be carried out by authorised plumber.

5.If leaks are located, immediately shut power and the water supply and check the hose connections fully. Tighten connections if necessary.

6.If for any reason you are unable to stop the leak yourself please seek advice from a qualified plumber.

7.The minimum height clearance required to install your dishwasher on a countertop surface with overhead cupboards is 50 cm.

8.Make sure there is an electrical power supply within easy reach of the machine. The power cord is 180 cm long.

9.The dishwasher must be installed on a ‘solid’ level surface.

10.To level the dishwasher, adjust the 4 level screws (feet) under the dishwasher.

11.Ensure that no hoses or cables are squeezed or damaged by unit or other items.

Water Pressure

For best operating results, incoming water pressure should be between 0,3 and 10 bar.

Electrical Instructions:

An electrical supply of 220-240 volts AC only, 50Hz is required. Make sure that a suitable electrical supply socket is located close to where the dishwasher is to be placed. The appliance Must be earthed. The appliance is equipped with a power supply cord having a 3-pin grounding plug. To minimize possible shock hazards it must be plugged into a matching 3-pin grounding type electrical outlet. The electrical outlet should be easy accessible. Fixed connection to the mains supply, must be made by an authorised electrician.

If the mains plug is unsuitable for the socket outlet in your home or is removed for any other reason, then the cut off plug should be disposed of safety to prevent the hazard of electric shock.

FOR BEST RESULTS:

Your dishwasher cleans by spraying a mixture of hot clean water and detergent (under pressure) against the soiled surface of dishes. The water is pumped through a rotating spray arm, drained through a filter removing food and soiled particles and pumped back through the spray arm. Soiled water is pumped out and replaced with clean water at the end of each cycle (the number of times depends on the cycle being used). For best cleaning results, the water temperature must be at least 55°C. To prevent dishwasher damage, the temperature of the incoming water supply should not exceed 65°C. NOTE: Hard Water conditions will adversely affect wash ability performance of your dishwasher. Hard Water conditions will also contribute to “Lime” (white film substance) deposits and/or “Scaling” on the stainless steel surface of the dishwasher tub and “Heater Element” located in the sump underneath the removable filter screen. To assist in minimizing these conditions, it is recommended to periodically operate/rinse the inside of the dishwasher (empty) using 1 cup of white vinegar (at least once a week).

Disconnecting your Dishwasher

-Close the water supply at the stopcock.

-Disconnect the power supply cord. Do not pull cord, but use plug only when removing. Alternatively remove fuses from buildings electrical fuse board.

-Disconnect the inlet hose assembly from the water supply. When the dishwasher is not in use, place/store the hose on the hanger hose bracket located on the rear wall of the dishwasher cabinet.

-Appliances that are to be discarded must be made unusable. Pull off the plug, remove cable and make the door lock and latch unusable

! IMPORTANT !

Once you open the water supply line, (even if it is closed immediately thereafter) the water inlet hose will be pressurized.

! CAUTION !

DO NOT LET CHILDREN DISCONNECT THE DISHWASHER. Close supervision of children is always important around appliances.

758-007 specifications

Melissa 758-007 is an innovative product that has garnered attention for its advanced features and reliable performance. Designed for both professional and casual users, this versatile device stands out in the market due to its exceptional technology and user-friendly interface.

At the heart ofMelissa 758-007 lies a powerful processor, ensuring that it operates efficiently even under heavy loads. The device is equipped with a robust RAM configuration, enabling seamless multitasking and improving the overall user experience. Whether you are running complex applications, streaming high-definition content, or engaging in resource-intensive tasks, Melissa 758-007 handles it effortlessly.

One of the notable features of Melissa 758-007 is its high-resolution display. Boasting vibrant colors and sharp imagery, the screen enhances visual content, making it an excellent choice for graphic designers, photographers, and videographers. The display's wide viewing angles further promote collaborative work, allowing multiple users to view the screen clearly from different positions.

In terms of connectivity, Melissa 758-007 excels with a range of options including Wi-Fi, Bluetooth, and USB-C ports. The inclusion of these technologies ensures that users can easily connect to various external devices and networks, facilitating data transfer and collaboration. Additionally, the device supports fast charging, allowing users to replenish battery life quickly during their travels or busy workdays.

The durability of Melissa 758-007 is another key characteristic. Crafted from high-quality materials, the device is built to withstand everyday wear and tear, making it ideal for users with active lifestyles. Furthermore, the lightweight design coupled with a sleek profile enhances portability, making it easy for users to carry it wherever they go.

Melissa 758-007 also prioritizes security, offering advanced encryption technologies that protect user data from potential threats. With built-in biometric authentication options, users can ensure that their information remains secure and accessible only to them.

In summary, Melissa 758-007 is a feature-rich device that combines power, performance, and portability. Its advanced technologies, impressive display, robust connectivity options, and focus on security make it an ideal choice for a diverse range of users. Whether for work, play, or creative endeavors, Melissa 758-007 delivers a comprehensive solution that meets the demands of modern-day use.