Auto Pause and Serve

NOTE:

•Press and hold arrow timer buttons to fast advance.

•Pay attention to the AM and PM display.

•If no buttons are pressed after 5 seconds, the displayed AUTO time setting will be saved.

To Begin Brewing Coffee After the

AUTO Brew Time Has Been Set

1.Make sure removable water reservoir is filled, correctly positioned and in place before starting.

2.Place the gold coffee filter (or paper filter) into the removable filter holder; add the desired amount of coffee grounds.

3.At the AUTO programmed time, the coffee maker will turn itself ON automatically. BREW will appear on the digital display as the coffee maker begins to heat. Coffee will begin flowing into the carafe.

4.Thermal Carafe Model HE100CMT: Once the brew cycle is complete, the coffee maker will turn itself OFF. The thermal carafe can be removed from the base plate.

5.Glass Carafe Model HE120CMG: READY will appear on the digital display when the coffee maker has completed brewing and is in the 2-hour keep warm mode. After 2 hours, the coffee maker will turn itself OFF. NOTE: The amount of brewed coffee may be slightly less than the amount of water placed in the water reservoir, as some of the water is absorbed by the coffee grounds. IMPORTANT: To cancel the AUTO future brew time, press the AUTO/CANCEL button.

6.The AUTO feature turns off after brewing. To set for the next day at the same time, press the AUTO/CANCEL button after loading coffee and water.

1.To pour a cup of coffee before the brew cycle is complete, simply remove the carafe from the base plate/warming plate and pour. Brewing will continue but dripping will automatically pause.

2.Return the carafe to the base plate/warming plate within 30 seconds; dripping will resume.

NOTE: Carafes must be placed and centered onto the base plate/ warming plate the carafe should rest firmly against the auto pause and serve assembly of the coffee maker.