Temperature Display | — | Displays actual oven cavity temperature during cooking cycle. |
Set Point | — | Press to display set temperature. |
Set Point Arrows | — 1. Press the Set Point button so that the set point is displayed, and | |
|
| at the same time, press the Set Point Arrows up or down until the |
|
| desired set point temperature appears in the digital display. |
|
| 2. Release the Set Point button. The actual oven cavity temperature |
|
| will display. |
Set Point Indicator Light — | When lit, indicates that the heat is being provided to the oven. When | |
|
| set point is reached, light will go off. |
Time Display | — Displays actual cooking time in minutes and tenths of minutes. | |
Time Range Switch | — Use to set cook time range from 2 to 8 minutes, 8 to 15 minutes, or 15 | |
|
| to 20 minutes. Switch must be on cook time range desired in order to |
|
| change belt speed. |
Belt Switch | — Press switch to ON to start the conveyor belt; press to OFF to stop the | |
|
| conveyor belt. |
Power Switch | — Press to ON to start the oven; press to OFF to stop the oven. When | |
|
| the power switch is pressed to ON, ignition occurs automatically. |
Time Knob | — After the Time Range Switch has been set to the desired time range, | |
|
| turn the knob clockwise to increase the cook time or counterclockwise |
|
| to decrease the cook time until it reaches the time desired on the time |
|
| display. |
Control Circuit Fuse | — | 25 Amp. / 250V. Time delay. |
Drive Motor Fuses | — 375 ma / 250V. | |
— 13 —