Hobart ML-126183, ML-126181, HGC4832, HGC6024, HGC3018, HGC4018, ML-126180 manual Electrical Connections

Page 9

ELECTRICAL CONNECTIONS

WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.

WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A THREE-PRONG GROUNDING PLUG. IT IS IMPERATIVE THAT THIS PLUG BE CONNECTED INTO A PROPERLY GROUNDED THREE-PRONG RECEPTACLE. IF THE RECEPTACLE IS NOT THE PROPER GROUNDING TYPE, CONTACT AN ELECTRICIAN. DO NOT REMOVE THE GROUNDING PRONG FROM THIS PLUG.

The oven is equipped with a power supply cord for service at 120 volts and 20 amps. A 20 amp receptacle and service is required for proper operation of the oven.

Do not connect the oven to electrical supply until after gas connections have been made.

— 9 —

Image 9

Contents Model HGC Series GAS Conveyor Ovens For Your Safety Important for Your SafetyTable of Contents Unpacking InstallationLocation Installation Codes and Standards United States of AmericaCanada Installing Basic Oven AssemblyOvens Mounted on Legs or Feet Ovens Mounted on CastersTesting the GAS Supply System Installing Stacked OvensLeveling GAS ConnectionsElectrical Connections Controls Figs OperationLoad Indicator Light Temperature DisplayTime Range Switch Belt SwitchAlternate Controls Fig Set Point Arrows Set Point Indicator LightControl Circuit Fuse Drive Motor FusesLighting Instructions Before First USETurning the Oven On Turning the Oven OffExtended Shutdown Using the OvenAir Distribution Panels Loading and Unloading the OvenDaily CleaningConveyor Remove Cover Weekly Conveyor Belt Assembling and Disassembling Fig Type APPROX. Time Temp Food Product MIN Italian Cooking ChartBreads & Subs BakeryMaintenance Service and Parts InformationInspection Problem Possible Causes Action Troubleshooting Guide