Before First USE, Lighting Instructions | Hobart HGC3624, ML-126181

BEFORE FIRST USE

1.Clean the protective metal oils from all surfaces of the oven.

2.Use a non-corrosive, grease dissolving commercial cleaner. Follow manufacturer's directions.

3.Rinse thoroughly with a clean damp cloth and wipe dry with a soft clean cloth.

•DO NOT hose down the oven.

•Do not use this oven if its controls have been wet. If the controls are wet, contact your Hobart servicer.

The burner control is a solid state device that automatically ignites and monitors the pilot flame.

To turn the oven on:

1.Turn the gas combination valve (Fig. 5) to ON.

2.Push the Power Switch to ON.

3.Set the oven temperature to desired temperature.

GAS COMBINATION

CONTROL VALVE

PL-41125-1

Fig. 5

If the burner fails to light within 90 seconds:

•The burner control will shut off the gas combination valve and will lock out.

•To reset the burner control for restart, press the Power Switch to OFF and then to ON.

If the burner still fails to light:

•Turn the oven off.

•Wait 5 minutes before restarting.

If lockout occurs again, contact your local Hobart authorized servicer.

Turn Power Switch to OFF.

— 14 —