Inspect Door Components

1.Check loading door latch.

A.Check door gasket for good condition. If door gasket needs replacement, contact your local Hobart office for service.

B.Check loading door latch. Latch must fully extend (Fig. 5) when door is closed and contacting door gasket. Leave about 1/8" gap for heat expansion.

C.Adjust strike in or out as required by loosening one screw (Fig. 6) on each side of strike.

D.Tighten screws.

Fig. 6

Fig. 5

2. Check door sweep.
A. The door sweep should hit the floor
approximately 1/8" evenly across door
width, when door is in the closed position.
B. Turn oven on.
C. If air blows out from underneath the door
(or steam), door will need to be adjusted.
If door sweep needs replacement or
adjustment, contact your local Hobart
office for service.
3. Check interior door release (Fig. 7) for proper	Fig. 7
operation.
4. Check door switch for proper operation.
A. When door switch actuator rod is in the
down position (door open), the rod should
extend 3/8" to 7/16" from the underside of
the header and easily slide up ramp as
door is closed (Fig. 8). Slide ramp should
be positioned as shown below. If not,
re-form ramp as necessary.
	Fig. 8

– 27 –

HBA2G, HBA2E specifications

The Hobart HBA2E and HBA2G are two innovative countertop dishwashers designed to meet the needs of busy commercial kitchens. Both models are engineered to streamline the dishwashing process, enhance productivity, and ensure optimal hygiene in food service environments.

The HBA2E model features a compact and space-efficient design, making it ideal for establishments with limited kitchen space. Its impressive capacity allows for the washing of up to 30 racks per hour. This high throughput is complemented by a powerful wash system that ensures thorough cleaning of various types of dishes, glassware, and utensils. The HBA2E incorporates advanced cleaning technologies that utilize a combination of spray arms, high water temperatures, and specially engineered detergents to achieve sparkling results.

On the other hand, the HBA2G model is designed for high-volume applications where speed and efficiency are paramount. It can handle up to 45 racks per hour, effectively doubling the output compared to its counterpart. This model employs a unique wash and rinse system that utilizes smart technology to optimize water usage while maintaining sanitation standards. Both units are equipped with state-of-the-art filtration systems that minimize the risk of soil redepositing on clean dishes.

Key features of the HBA2E and HBA2G include user-friendly controls, allowing operators to select wash cycles easily. The digital display shows cycle status and maintenance reminders to ensure optimal performance. Both models are constructed from durable stainless steel, providing longevity and resistance to the rigors of commercial use.

Safety has not been overlooked, with features such as automatic door locking during operation to prevent accidents. Additionally, both models are designed for ease of maintenance, with accessible components for quick troubleshooting and repairs.

Among the standout characteristics of both the HBA2E and HBA2G is their energy-efficient operation. They are designed to reduce water and energy consumption, aligning with sustainable practices increasingly prioritized in the food service industry. These dishwashers not only help businesses save on utility costs but also contribute to a lower environmental impact.

In summary, the Hobart HBA2E and HBA2G dishwashers are ideal solutions for commercial kitchens seeking efficiency, reliability, and performance. With their advanced technologies, high throughput capabilities, and user-friendly features, they stand out as excellent choices for establishments aiming to enhance their dishwashing operations.