Frymaster BIGLA30 warranty 24hR

Page 34

10.

Use the 3and 4 buttons to toggle between 12hr and

 

24hR.

11.

With the desired selection displayed, press the (1

 

yes) button .

The computer displays ENTER TIME on the left and current time on the right in hh:MM format. AM or PM is displayed if 12 hours system is chosen.

Example: 7:30 AM is entered 0730 if using the 12 hour format. 2:30 is entered 1430 if using 24 hour format. To change AM and PM use the tu buttons.

12.Enter time in hours and minutes using the number buttons 0-9.

13. With the desired selection displayed, press the (1 yes) button.

The computer displays DATE FORMAT on the left and US on the right.

14. Use the 3and 4 buttons to toggle between US and interntl.

15. With the desired selection displayed, press the (1 yes) button.

The computer displays enter date on the left and MM-DD-YY or DD-MM-YYon the right changing to the current date.

Example:

US Format – Dec. 5, 2008 is entered as 120508.

International Format – 5 Dec. 2008 is entered as 051208

16. Enter the date using the number buttons 0-9.

17. With the desired selection displayed, press the (1 yes) button.

The computer displays fryer type on the left and Elec on the right.

18. Use the 3and 4buttons to toggle between elec and gas.

19. With the desired selection displayed, press the (1 yes) button.

The computer displays VAT type on the left and SPLIT on the right.

4-10

Page 33 Page 35
Image 34
Page 33 Page 35
Contents Manufactured Canada Page LOV GAS Warranty Statement Parts Return Safety Information GeneralComputer Information for the M3000 Computers Installation, Operating, and Service PersonnelEuropean Community CE Specific Information Qualified Service Personnel Qualified Installation PersonnelQualified AND/OR Authorized Operating Personnel Retain and Store this Manual in a Safe Place for Future USE General Installation Requirements Clearance and VentilationNational Code Requirements Electrical Grounding RequirementsCaster Installation Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes CE Standard Converting to Another Gas Type Single Dual Gas VatCE Gas Conversion Kits for Units with Gas Valve Non-CE Gas Conversion KitsNon-CE Gas Conversion Kits for Australia CE GAS Conversion InstructionsAfter Fryers are Positioned at the Frying Station Typical Configuration BIGLA330 Shown BIGLA30 Series GEN II LOV GAS Fryer Operating InstructionsPage Press the computer ON/OFF switch to the OFF position Lighting the FryerShutdown OperationPrepare the System for Use Low Oil Volume Automatic RefillInstall the JIB Changing the JIBFront of the fryer off see Figure FR Fries M3000 General InformationBasic Operation Cooking with Multi-Product Display Cooking with Dedicated Display Changing from Breakfast Setup to Lunch Changing from Lunch Setup to Breakfast Navigation Buttons Filter, Temperature and Info ButtonsM3000 Button Description and Functions Cook Channel and Selection ButtonsM3000 Menu Summary Tree Draining, Refilling, and Disposing of OilFryer Setup Mode Programming 123424hR Escape Menu Items 10 M3000 Common TasksFull Product Adding New Product Items to the Menu Product SelectionSelection ProdCook ID Disable Product selection prompt Storing Menu Items in Product ButtonsTo Level 1 program changing to the Product selection Draining and Refilling Vats, and Disposing of Oil Disposal for Non-Bulk Oil SystemsDraining and Disposing Oil using Bulk Oil Systems Refilling JIB Oil SystemsPage Accessing the Filter Menu Refilling the Vat from Bulk Oil Systems after DisposalDrain to Pan Fill Vat from Drain Pan Yes noFill Vat from Bulk Programming Level One Pan to WasteAIF Clock Deep Clean Mode BOIL-OUT Selection displayPAN EMPTY? and Yes noPage HIGH-LIMIT Test Mode Programming Level Two CompProduct Comp Mode Level 2 ProgramLOG Mode Password Setup ModeAlert Tone Mode Filter After Info Mode Filter TimeFull VAT Configuration Filter Stats ModeSplit VAT Configuration Review Usage Mode DAY wed, Date 03/20/07 Current day and dateFull / Split VAT Configuration Last Load Mode4321 Page BIGLA30 Series GEN II LOV GAS Fryer Filtration Instructions IntroductionDo not USE Filter Powder with the PAD DRAINING, Washing and Filling during the process Auto Demand FiltrationPage Clogged Drain Error Normal Operation Resumes Filter Error FlowchartSystem Error FIXED? YES no is displayedClogged Drain or Oil Sensor Fail Flowchart Filter Busy Page Page Inspect Fryer and Accessories for Damage Fryer Preventive Maintenance Checks and ServiceDaily Checks and Service Clean Fryer Cabinet Inside and Out DailyDeep Clean Boiling Out the Frypot Weekly Checks and Service 6.3.1 Clean Behind FryersCleaning the Frypot Quarterly Clean Filter Pan, Detachable Parts and AccessoriesClean Combustion Air Blower Assembly BI-WEEKLY Checks and ServiceQuarterly Checks and Service Check M3000 Computer Set Point AccuracyLeft Viewing PortRight Port is Behind Motor Annual/Periodic System Inspection Clean Oil Level SensorReplace the O-RINGS FryerBuilt-In Filtration System BIGLA30 Series GEN II LOV GAS Fryer Operator Troubleshooting Change Filter Service Auto Top Off Problems Probable Causes Corrective Action Problem ExplanationError Drain Valve not Closed Bulk Oil Systems Used oil to a JIBService Hotline
Related manuals
Manual 88 pages 5.79 Kb Manual 26 pages 13.97 Kb

BIGLA30 specifications

The Frymaster BIGLA30 is a state-of-the-art commercial frying solution designed to meet the high demands of busy food service environments. Known for its energy efficiency, reliability, and advanced technology, the BIGLA30 has become a favorite among restaurateurs and catering businesses.

One of the standout features of the BIGLA30 is its large capacity. With a significant oil capacity, it allows for frying large quantities of food simultaneously, making it ideal for high-volume establishments. This capacity enables kitchens to keep up with demand during peak hours, ensuring that orders are fulfilled quickly and efficiently.

The Frymaster BIGLA30 is equipped with advanced digital controls that simplify the frying process. The intuitive interface allows operators to easily adjust cooking times and temperatures, ensuring consistent results. The digital controls are also equipped with a filtration system that automatically cleans the oil, which prolongs its life and ensures the food maintains optimal flavor.

Another prominent feature of the BIGLA30 is its energy-efficient design. It utilizes innovative heating technology that reduces energy consumption while providing high-performance frying. This not only helps to lower operational costs but also supports environmentally friendly practices within the kitchen.

Safety is paramount in any commercial kitchen, and the BIGLA30 excels in this area. It is designed with safety mechanisms such as automatic shut-off and temperature control systems to prevent overheating. Additionally, the unit features large, easy-to-grip handles on pots, allowing for safe handling and transfer of food items.

In terms of construction, the Frymaster BIGLA30 is built with high-quality materials that ensure durability and longevity. The robust design can withstand the rigors of a busy kitchen and is easy to maintain, reducing downtime and service costs. Its sleek stainless-steel exterior not only presents a professional aesthetic but is also simple to clean, contributing to overall kitchen hygiene.

Furthermore, the BIGLA30 is compatible with various cooking applications, making it versatile enough to fry a wide range of items from crispy fries to delicious chicken. This adaptability makes it a valuable addition to any food service operation.

In summary, the Frymaster BIGLA30 is a top-tier frying solution that combines capacity, energy efficiency, advanced technology, and safety features. Its ability to deliver consistent results while minimizing costs makes it an essential tool for any commercial kitchen.
Top Page Image Contents