Frymaster BIPH55 / MPH55 Series GAS Fryer Installation Instructions, Clearance and Ventilation

Page 11

BIPH55 / MPH55 SERIES GAS FRYER

CHAPTER 2: INSTALLATION INSTRUCTIONS

2.1General Installation Requirements

Qualified, licensed, and/or authorized installation or service personnel, as defined in Section 1.6 of this manual, should perform all installation and service on Frymaster equipment.

Conversion of this appliance from one type of gas to another should only be performed by qualified, licensed, and/or authorized installation or service personnel as defined in Section 1.6 of this manual.

Failure to use qualified, licensed, and/or authorized installation or service personnel (as de- fined in Section 1.6 of this manual) to install, convert to another gas type or otherwise service this equipment will void the Frymaster warranty and may result in damage to the equipment or injury to personnel.

Where conflicts exist between instructions and information in this manual and local or na- tional codes or regulations, installation and operation shall comply with the codes or regula- tions in force in the country in which the equipment is installed.

DANGER

Building codes prohibit a fryer with its open tank of hot oil being installed beside an open flame of any type, including those of broilers and ranges.

Upon arrival, inspect the fryer carefully for visible or concealed damage. (See Shipping Damage Claim Procedure in Section 1.7 of this manual.)

DANGER

Frymaster appliances equipped with legs are for stationary installations. Appliances fitted with legs must be lifted during movement to avoid damage to the appliance and bodily injury. For movable installations, optional equipment casters must be used. Questions? Call 1-800-551-8633.

2.1.1 CLEARANCE AND VENTILATION

The fryer(s) must be installed with a 6” (150 mm) clearance at both sides and back when installed adjacent to combustible construction; no clearance is required when installed adjacent to noncombustible construction. A minimum of 24” (600 mm) clearance should be provided at the front of the fryer.

WARNING

Do not block the area around the base or under the fryers.

2-1

Page 10 Page 12
Image 11
Page 10 Page 12
Contents OPERATOR’S Manual Frymaster BIPH55/MPH55 Series GAS Fryer For Your SafetyCanada Page Warranty Statement Warranty Provisions Cooking Computer General BIPH55 / MPH55 Series GAS Fryer IntroductionComputer Information for the M2000 Computers Safety InformationQualified AND/OR Authorized Operating Personnel Qualified Installation PersonnelQualified Service Personnel What to do if your equipment arrives damaged Shipping Damage Claim ProcedureParts Ordering and Service Information Retain and Store this Manual in a Safe Place for Future USE Do not block the area around the base or under the fryers BIPH55 / MPH55 Series GAS Fryer Installation InstructionsGeneral Installation Requirements Clearance and VentilationElectrical Grounding Requirements National Code RequirementsCaster Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes Single Dual Gas Vat CE StandardNon-CE Gas Conversion Kits After the Fryers Are Positioned At the Frying Station CE GAS Conversion InstructionsFinding Your WAY around the BIPH55 Series GAS Fryer Typical Configuration BIPH255 ShownBIPH55 / MPH55 Series GAS Fryer Operating Instructions Page Lighting the Fryer Press the computer ON/OFF switch to the OFF positionBoiling Out the Frypot When shutting the fryers down at closing timeShutdown For short-term shut down during the workdayIntroduction BIPH55 / MPH55 Series GAS Fryer Filtration InstructionsScreen Filter Pad or Filter Paper Crumb Tray Hold-Down Ring Do not use filter powder with the pad Filter Pump Reset Switch Page Clean Fryer Cabinet Inside and Out BIPH55 / MPH55 Series GAS Fryer Preventive MaintenanceDaily Checks and Service Inspect Fryer and Accessories for DamageWeekly Checks and Service 5.3.1 Clean Behind Fryers Check M2000 Computer Set Point Accuracy Monthly Checks and ServiceBlower Wiring connection assembly mounting nuts Left Viewing Port is Behind Motor Right Fryer Built-In Filtration System Before calling a servicer or the Frymaster Hotline BIPH55 / MPH55 Series GAS Fryer Operator TroubleshootingProblem Probable Causes Corrective Action Troubleshooting Fryers Computer and Heating ProblemsError Messages and Display Problems Shows HI-LIMIT Shows LOW TempFailure Shows IgnitionShows HI 2 BAD Troubleshooting the Built-in Filtration SystemBut no transfer takes FromPrevious Filter Pump startsBack Replacing the Controller or Controller Wiring HarnessThis page Intentionally Left Blank 819-6087

BIPH55, MPH55 specifications

The Frymaster BIPH55 and MPH55 are cutting-edge fryers designed to meet the needs of modern commercial kitchens. Renowned for their efficiency and reliability, these fryers are perfect for establishments looking to optimize their frying processes, ensuring that food is cooked to perfection while minimizing oil use and maximizing output.

One of the main features of the Frymaster BIPH55 and MPH55 is their innovative oil filtration system. This technology allows for continuous oil filtration during operation, which not only enhances the lifespan of the oil but also maintains food quality. The built-in filtration system reduces the need for manual oil changes, saving both labor and costs while delivering crispier, more delicious fried products.

Additionally, the BIPH55 model is designed with a high-efficiency burner system that reduces energy consumption, making it an eco-friendly choice. This system increases cooking speeds and provides precise temperature control, which is critical for achieving consistent results. The adjustable temperature settings allow chefs to customize their frying processes to suit various types of cuisine, from crispy French fries to succulent chicken wings.

Another standout characteristic of these fryers is their digital control interface. The user-friendly display allows operators to monitor cooking times and temperatures easily, reducing the risk of human error. Programmable controls can store up to 12 menu items, allowing for quick access to settings tailored for specific recipes, thus enhancing efficiency during peak hours.

The durable construction of the Frymaster BIPH55 and MPH55 ensures a long lifespan, even in the busiest kitchens. The stainless steel body is easy to clean and resistant to corrosion, which is essential for maintaining hygiene standards. The fry baskets are designed to be lightweight yet robust, allowing for easy handling while ensuring that food items can be submerged without difficulty.

Safety features are also a priority in these models, with automatic shut-off mechanisms that prevent overheating and ensure safe operation. The design includes a large oil capacity, which is ideal for high-volume frying operations, allowing establishments to serve their customers promptly without sacrificing quality.

In conclusion, the Frymaster BIPH55 and MPH55 are superb additions to any commercial kitchen looking to enhance their frying capabilities. With a combination of advanced technologies, robust construction, user-friendly controls, and energy efficiency, these fryers represent an investment in quality cooking and operational excellence. Whether for a fast-food outlet, restaurant, or catering service, the BIPH55 and MPH55 are poised to elevate the frying experience.
Top Page Image Contents