Frymaster warranty BIPH55 / MPH55 Series GAS Fryer Introduction, General

Page 6

BIPH55 / MPH55 SERIES GAS FRYER

CHAPTER 1: INTRODUCTION

1.1General

Read the instructions in this manual thoroughly before attempting to operate this equipment. This manual covers all configurations of models MPH55 and BIPH55 fryers. Models designated MPH55 do not have built-in filtration systems. Models designated BIPH55 are equipped with FootPrint Pro built-in filtration systems. The fryers in this model family have most parts in common, and when discussed as a group, will be referred to as “Pro Series H55” fryers.

Although similar in appearance to the BIH52 McDonald’s fryers, the BIPH55 fryers feature a significantly different built-in filtration system. The new Euro-Look incorporates rounded topcaps and large round drains, which ensures that fries and other debris will be washed into the filter pan. Other features, including the deep cold-zones and easy to clean, open frypots remain essentially unchanged. All Pro Series H55 Gas fryers come standard with M2000 computer, electronic ignition, melt cycle, and boil-out mode.

Fryers in this series come in full- or split-vat arrangements, and can be purchased as single units or in batteries of up to five fryers.

Pro Series H55 high-efficiency gas fryers employ a unique infrared burner system that uses up to 43% less energy to cook the same volume as conventional open-burner fryers.

All Pro Series H55 Gas fryers are of an open-frypot design with no tubes and have a hand-sized opening into the deep cold zone, which makes cleaning the stainless frypot quick and easy.

Heating is supplied by a pair of infrared burner assemblies mounted on each side of the frypot. A dedicated blower mounted on the front of the frypot supplies combustion air for the burners. Pro Series H55 Gas fryers can be configured for natural gas, propane (LP), or manufactured gas, as required by the customer.

Each frypot is equipped with a temperature probe for precise temperature control.

All fryers in this series require an external source of AC electrical power. Units can be configured for voltages ranging from 100 VAC to 240 VAC.

BIPH55 and MPH55 fryers are shipped completely assembled. All fryers are shipped with a package of standard accessories. Each fryer is adjusted, tested, and inspected at the factory before crating for shipment.

This appliance is only for professional use and shall be used by qualified personnel only, as defined in Section 1.6.

1-1

Page 5 Page 7
Image 6
Page 5 Page 7
Contents For Your Safety OPERATOR’S Manual Frymaster BIPH55/MPH55 Series GAS FryerCanada Page Warranty Statement Warranty Provisions Cooking Computer BIPH55 / MPH55 Series GAS Fryer Introduction GeneralSafety Information Computer Information for the M2000 ComputersQualified Installation Personnel Qualified Service PersonnelQualified AND/OR Authorized Operating Personnel Shipping Damage Claim Procedure Parts Ordering and Service InformationWhat to do if your equipment arrives damaged Retain and Store this Manual in a Safe Place for Future USE Clearance and Ventilation BIPH55 / MPH55 Series GAS Fryer Installation InstructionsGeneral Installation Requirements Do not block the area around the base or under the fryersNational Code Requirements Electrical Grounding RequirementsCaster Installation Mbar = 10,2 mm H2O Non-CE Standard For Incoming Gas Pressures Gas Connection Pipe Sizes CE Standard Single Dual Gas VatNon-CE Gas Conversion Kits CE GAS Conversion Instructions After the Fryers Are Positioned At the Frying StationTypical Configuration BIPH255 Shown BIPH55 / MPH55 Series GAS Fryer Operating InstructionsFinding Your WAY around the BIPH55 Series GAS Fryer Page Press the computer ON/OFF switch to the OFF position Lighting the FryerFor short-term shut down during the workday When shutting the fryers down at closing timeShutdown Boiling Out the FrypotBIPH55 / MPH55 Series GAS Fryer Filtration Instructions IntroductionScreen Filter Pad or Filter Paper Crumb Tray Hold-Down Ring Do not use filter powder with the pad Filter Pump Reset Switch Page Inspect Fryer and Accessories for Damage BIPH55 / MPH55 Series GAS Fryer Preventive MaintenanceDaily Checks and Service Clean Fryer Cabinet Inside and OutWeekly Checks and Service 5.3.1 Clean Behind Fryers Monthly Checks and Service Check M2000 Computer Set Point AccuracyBlower Wiring connection assembly mounting nuts Left Viewing Port is Behind Motor Right Fryer Built-In Filtration System BIPH55 / MPH55 Series GAS Fryer Operator Troubleshooting Before calling a servicer or the Frymaster HotlineTroubleshooting Fryers Computer and Heating Problems Problem Probable Causes Corrective ActionError Messages and Display Problems Shows Ignition Shows LOW TempFailure Shows HI-LIMITTroubleshooting the Built-in Filtration System Shows HI 2 BADFilter Pump starts FromPrevious But no transfer takesReplacing the Controller or Controller Wiring Harness BackThis page Intentionally Left Blank 819-6087

BIPH55, MPH55 specifications

The Frymaster BIPH55 and MPH55 are cutting-edge fryers designed to meet the needs of modern commercial kitchens. Renowned for their efficiency and reliability, these fryers are perfect for establishments looking to optimize their frying processes, ensuring that food is cooked to perfection while minimizing oil use and maximizing output.

One of the main features of the Frymaster BIPH55 and MPH55 is their innovative oil filtration system. This technology allows for continuous oil filtration during operation, which not only enhances the lifespan of the oil but also maintains food quality. The built-in filtration system reduces the need for manual oil changes, saving both labor and costs while delivering crispier, more delicious fried products.

Additionally, the BIPH55 model is designed with a high-efficiency burner system that reduces energy consumption, making it an eco-friendly choice. This system increases cooking speeds and provides precise temperature control, which is critical for achieving consistent results. The adjustable temperature settings allow chefs to customize their frying processes to suit various types of cuisine, from crispy French fries to succulent chicken wings.

Another standout characteristic of these fryers is their digital control interface. The user-friendly display allows operators to monitor cooking times and temperatures easily, reducing the risk of human error. Programmable controls can store up to 12 menu items, allowing for quick access to settings tailored for specific recipes, thus enhancing efficiency during peak hours.

The durable construction of the Frymaster BIPH55 and MPH55 ensures a long lifespan, even in the busiest kitchens. The stainless steel body is easy to clean and resistant to corrosion, which is essential for maintaining hygiene standards. The fry baskets are designed to be lightweight yet robust, allowing for easy handling while ensuring that food items can be submerged without difficulty.

Safety features are also a priority in these models, with automatic shut-off mechanisms that prevent overheating and ensure safe operation. The design includes a large oil capacity, which is ideal for high-volume frying operations, allowing establishments to serve their customers promptly without sacrificing quality.

In conclusion, the Frymaster BIPH55 and MPH55 are superb additions to any commercial kitchen looking to enhance their frying capabilities. With a combination of advanced technologies, robust construction, user-friendly controls, and energy efficiency, these fryers represent an investment in quality cooking and operational excellence. Whether for a fast-food outlet, restaurant, or catering service, the BIPH55 and MPH55 are poised to elevate the frying experience.
Top Page Image Contents