Component

24G SERIES FLATBOTTOM GAS FRYERS

CHAPTER 2: PARTS LIST

ITEM PART #

1823-3637

2810-2135

3810-2136

810-2100

810-2252

810-2395

809-0428

809-0823

809-0189

5200-3097

6200-3096

7823-4078SP

8810-2237

9106-1939SP

10823-3646

11823-3651

12810-2762

*816-0550

13813-0625

14813-0632

15810-2125

*230-0089

16813-0634

17813-0003

18813-0022

19810-0278

20813-0345

21810-2321

22810-2172

23813-0735

24810-2375

25813-0165

26810-2170

27810-2173

28813-0654

29823-3642

30201-3105

31202-3105

32813-0631

33810-2113

34106-1454SP

35210-3118

36824-1090

37807-3574

38807-3577

39807-1219

40807-1224

41813-0770

*813-0760

*813-0659

42809-0884

43816-0544

44823-3652

* 200-1838

Filter Frame Assembly Caster without Brake, 3-inch Caster with Brake, 3-inch

Filter Pump and Motor Components Motor, 120/230V 1/3 HP Filter Pump

Pump, 5GPM (use 810-2098 for 8GPM Pump) Seal, Shaft (O-Ring)

Bolt, ¼-20 x ½-inch Hex Head (Motor Mount) Nut, ¼-20 Nylock (Motor Mount)

Washer, ¼-inch Flat (Motor Mount) Holder, Hose

Support, Pipe (Polish and Return Assemblies) Pan Assembly, ND90 Series

Filter Leaf Assembly (includes leaf to pump plumbing and port fittings) Cover with Handle, Filter Front

Holding Pan (for pan screen inserts)

Insert, Pan Screen (two required for Item 49)

Connector with Collar, ⅜-inch Female Quick Disconnect O-Ring, ⅜-inch Quick Disconnect (use 816-0545 for ½-inch)Nipple, ⅜-inch X Close NPT

Elbow, ⅜-inch X 90° NPT Street Valve, ⅜-inch Ball

Handle, Ball Valve

Elbow, ½-inch to ⅜-inch NPT Reduction Tee, ½-inch NPT

Nipple, ½-inch X Close NPT Valve, ½-inch Ball Elbow, ½-inch X 45° NPT

Hose Assembly, 7¾-inch (Polishing Hose)

Connector, ⅜-inch Male Quick-Disconnect

Reducer, ½-inch X ⅜-inch NPT Bell (used with Item 24) Hose Assembly, ½-inch X 32-inch

Elbow, ½-inch X 90° NPT Street Connector, ½-inch Male Quick-Disconnect

Connector without Collar, ½-inch Female Quick-Disconnect Nipple, ½-inch X 4-inch NPT

Spreader Bracket Assembly

Bracket, Left Spreader Assembly Holding

Bracket, Right Spreader Assembly Holding Elbow, ⅜-inch X 90° NPT

Hose, ½-inch X ⅜-inch X 61.5-inch Wash-Down

Wand Assembly, Wash-Down Hose (use 810-2188 for wand only) Bracket, Support- Wash-Down Hose

Box, Switch/Circuit Breaker Switch, Power ON/OFF Rocker

Circuit Breaker, 120VAC 7-Amp(use 807-3538 for 230VAC 5-Amp) Receptacle, 120V 3-Wire

Cordset, 120V 3-Wire

Tee, 1½-inch X 1¼-inch Offset No Flush Drainpipe (use 813-0768 for units with flush) Tee, Drainpipe, 1½-inch X 1¼-inch (all except right end)

Cap, 1½-inch Pipe (used with Item 41) Slip-Nut, 1½-inch Drainpipe

O-Ring, Slip-Nut (two required per slip-nut) Drainpipe, 1.625-inch Flanged (to left-hand filter) Drainpipe, 1.625 x 17½-inch (use 200-1839 for 23½-inch)

* Not illustrated.

2-19